EKMY100ESS101MEB5D Datasheet, PDF (1/2 Pages) United Chemi-Con, Inc. – Aluminum Electrolytic Capacitor

Engineering Bulletin Tentative
No.737C / Nov.2004
Aluminum Electrolytic Capacitor
@Endurance : 105C 4,000 to 7,000 hours
@Long life and impedance specified version of KME series
@Non solvent-proof
@Pb-free design
?SPECIFICATIONS
Items
Category
Temperature Range
Rated Voltage Range
Capacitance Tolerance
Leakage Current
Dissipation Factor
(tane)
Low Temperature
Characteristics
(Max. Impedance Ratio)
Endurance
Shelf Life
Characteristics
-40 to +105C
10 to 50Vdc
P20% (M)
(at 20C, 120Hz)
I=0.01CV or 3MA, whichever is greater.
Where, I : Max. leakage current (MA), C : Nominal capacitance (MF), V : Rated voltage (V)
(at 20C after 2 minutes)
Rated voltage (Vdc)
10V 16V 25V 35V 50V
tanE (Max.)
0.19 0.16 0.14 0.12 0.10
When nominal capacitance exceeds 1,000MF, add 0.02 to the value above for each 1,000MF increase.
(at 20C, 120Hz)
Rated voltage (Vdc)
10V 16V 25V 35V 50V
Z(-25C)/Z(+20C)
3
2
2
2
2
Z(-40C)/Z(+20C)
6
4
3
3
3
(at 120Hz)
The following specifications shall be satisfied when the capacitors are restored to 20C after subjected to DC voltage with the rated
ripple current is applied for the specified period of time at 105C.
Time
F5 & 6.3 : 4,000hours F8 & 10 : 5,000hours F12.5 and larger : 7,000hours
Capacitance change [P25% of the initial value
D.F. (tanE)
[200% of the initial specified value
Leakage current
[The initial specified value
The following specifications shall be satisfied when the capacitors are restored to 20C after exposing them for 1,000 hours at 105C
without voltage applied.
Capacitance change [P25% of the initial value
D.F. (tanE)
[200% of the initial specified value
Leakage current
[The initial specified value
?DIMENSIONS [mm]
@Terminal Code : E
Sleeve(Brown : PET)
L'
Vent
(except F5 & F6.3)
15min.
4min.
(F5 to F10)
(F12.5 to F18)
Gas escape end seal
fD 5 6.3 8 10 12.5 16 18
fd 0.5 0.5 0.6 0.6 0.6 0.8 0.8
F 2.0 2.5 3.5 5.0 5.0 7.5 7.5
fD'
FD+0.5max.
L'
L+1.5max.
?PART NUMBERING SYSTEM
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
E KMY AAA E AA AAA M AAA N
Supplement code
Size code
Capacitance tolerance code
Capacitance code (ex. 0.47MF:R47,10MF:100,100MF:101)
Lead forming·taping code
Terminal code
Voltage code (ex. 10V:100,35V:350,100V:101)
Series code
Category
?RATED RIPPLE CURRENT MULTIPLIERS
@Frequency Multipliers
Frequency (Hz)
Capacitance (mF)
0.47 to 4.7
10 to 330
470 to 1,000
2,200 to 10,000
120
0.40
0.55
0.70
0.80
1k
0.70
0.80
0.85
0.95
10k
0.90
0.95
0.95
1.00
100k
1.00
1.00
1.00
1.00
Specifications in this bulletin are subject to change without notice.
NIPPON CHEMI-CON CORPORATION
1246
1