|
EKLG401E Datasheet, PDF (1/2 Pages) United Chemi-Con, Inc. – Overvoltage resistant design, 105℃ | |||
|
MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS
Overvoltage resistant design, 105â
KLGSeries
ã»Doesn't spark with DC over voltage
ã»Endurance with ripple current : 2,000 hours at 105â
ã»Non solvent resistant type
ã»RoHS Compliant
KLJ P176
Downsized
KLG
âSPECIFICATIONS
Items
Characteristics
Category
Temperature Range
-25 to +105â
Rated Voltage Range
Capacitance Tolerance
Leakage Current
Dissipation Factor
(tanδ)
Low Temperature
Characteristics
(Max. Impedance Ratio)
Endurance
Shelf Life
200 & 400Vdc
±20% (M)
(at 20â, 120Hz)
I=0.04CV+100
Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V)
(at 20â after 1 minute)
Rated voltage (Vdc)
200V 400V
tanδ (Max.)
0.20 0.24
(at 20â, 120Hz)
Rated voltage (Vdc)
200V 400V
Z(-25â)/Z(+20â)
46
(at 120Hz)
The following specifications shall be satisfied when the capacitors are restored to 20â after subjected to DC voltage with the rated
ripple current is applied (the peak voltage shall not exceed the rated voltage) for 2,000 hours at 105â.
Capacitance change â¦Â±20% of the initial value
D.F . (tanδ)
â¦200% of the initial specified value
Leakage current
â¦The initial specified value
The following specifications shall be satisfied when the capacitors are restored to 20â after exposing them for 1,000 hours at 105â without
voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4.
Capacitance change â¦Â±20% of the initial value
D.F . (tanδ)
â¦200% of the initial specified value
Leakage current
â¦500% of the initial specified value
âDIMENSIONS [mm]
âTerminal Code : E
Sleeve (PET : Brown)
L'
Vent
15min.
4min.
Gas escape end seal
ÏD
16
18
Ïd
0.8
F
7.5
ÏD'
ÏD+0.5max.
L'
L+1.5max.
âPART NUMBERING SYSTEM
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
E KLG AAA E AA AAA M AAA S
Supplement code
Size code
Capacitance tolerance code
Capacitance code (ex. 47µF:470,100µF:101)
Lead forming·taping code
T erminal code
Voltage code (ex. 200V:201,400V:401)
Series code
Category
Please refer to "Product code guide (radial lead type)"
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
178
CAT. No. E1001N
|
▷ |