EKLG201ESS820ML20S Datasheet, PDF (1/2 Pages) United Chemi-Con, Inc. – MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS

MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS
Overvoltage-proof design, 105C
@No sparks against DC over-voltage
@Endurance with ripple current : 105C 2000 hours
@Non solvent-proof type
@Pb-free design
?SPECIFICATIONS
Items
Characteristics
Category
Temperature Range ^{-25 to +105C}
Rated Voltage Range
Capacitance Tolerance
Leakage Current
Dissipation Factor
(tane)
Low Temperature
Characteristics
(Max. Impedance Ratio)
Endurance
Shelf Life
200 & 400Vdc
P20% (M)
(at 20C, 120Hz)
I=0.04CV+100
Where, I : Max. leakage current (MA), C : Nominal capacitance (MF), V : Rated voltage (V)
(at 20C after 1 minute)
Rated voltage (Vdc)
200V 400V
tanE (Max.)
0.20 0.24
(at 20C, 120Hz)
Rated voltage (Vdc)
200V 400V
Z(-25C)/Z(+20C)
46
(at 120Hz)
The following specifications shall be satisfied when the capacitors are restored to 20C after subjected to DC voltage with the rated
ripple current is applied for 2000 hours at 105C.
Capacitance change [P20% of the initial value
D.F. (tanE)
[200% of the initial specified value
Leakage current
[The initial specified value
The following specifications shall be satisfied when the capacitors are restored to 20C after exposing them for 1000 hours at 105C
without voltage applied.
Capacitance change [P20% of the initial value
D.F. (tanE)
[200% of the initial specified value
Leakage current
[500% of the initial specified value
?DIMENSIONS [mm]
@Terminal Code : E
Sleeve (PET)
Vent
L+1.5max.
15min.
4min.
Gas escape end seal
?PART NUMBERING SYSTEM
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
E KLG AAA E AA AAA M AAA S
Supplement code
Size code
Capacitance tolerance code
Capacitance code (ex. 47MF:470,100MF:101)
Lead forming·taping code
Terminal code
Voltage code (ex. 200V:201,400V:401)
Series code
Category
Please refer to "A guide to global code (radial lead type)"
(1/2)
CAT. No. E1001E