EGPA101E Datasheet, PDF (1/3 Pages) United Chemi-Con, Inc. – MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS

MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS
Long life, Downsized, 125℃
GPA Upgrade!
Series
・Guaranteed short time at 150℃
・Downsized, low impedance and high-ripple current version of GXE
series
・Specified ESR after endurance test
・For high ripple current automotive applications.
(Direct fuel injection and electric power steering etc.)
・Endurance with ripple current : 3,000 to 5,000 hours at 125℃
・Solvent resistant type (see PRECAUTIONS AND GUIDELINES)
・RoHS Compliant
P189
GXE
Downsized
Higher ripple current
Higher temperature
LXZ
P158
GPA
◆SPECIFICATIONS
Items
Characteristics
Category
Temperature Range
-40 to +125℃
Rated Voltage Range
Capacitance Tolerance
Leakage Current
Dissipation Factor
(tanδ)
Low Temperature
Characteristics
(Max. Impedance Ratio)
Endurance 1
Endurance 2
Shelf Life
25 to 100Vdc
±20% (M)
(at 20℃, 120Hz)
I=0.03CV or 4µA, whichever is greater.
Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V)
(at 20℃, 1 minute)
Rated voltage (Vdc)
25V 35V 50V 63V 80V 100V
tanδ (Max.)
0.14 0.12 0.10 0.10 0.08 0.08
When nominal capacitance exceeds 1,000µF, add 0.02 to the value above for each 1,000µF increase.
(at 20℃, 120Hz)
Rated voltage (Vdc)
25V 35V 50V 63V 80V 100V
Z(-25℃)/Z(+20℃)
2
2
2
2
2
2
Z(-40℃)/Z(+20℃)
4
4
4
4
4
4
(at 120Hz)
The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated ripple
current is applied (the peak voltage shall not exceed the rated voltage) for 5,000 hours (3,000 hours for 25L and less) at 125 ℃.
Capacitance change ≦±30% of the initial value
D.F. (tanδ)
≦300% of the initial specified value
Leakage current
≦The initial specified value
The following specifications shall be satisfied when the capacitors are restored to 20℃ after the test condition that the rated voltage is
applied for 100 hours at 150℃ and DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage)
for 4,500 hours (2,500 hours for 25L and less) at 125℃.
Capacitance change ≦±30% of the initial value
D.F. (tanδ)
≦300% of the initial specified value
Leakage current
≦The initial specified value
The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 125℃ without
voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4.
Capacitance change ≦±30% of the initial value
D.F. (tanδ)
≦300% of the initial specified value
Leakage current
≦The initial specified value
◆DIMENSIONS [mm]
●Terminal Code : E
Sleeve (PET : Brown)
Vent
L'
15min.
4min. _{Gas escape end seal}
◆PART NUMBERING SYSTEM
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
E GPA AAA E AA AAA M AAA S
Supplement code
Size code
Capacitance tolerance code
Capacitance code (ex. 470µF:471, 1,000µF:102)
Lead forming·taping code
Terminal code
Voltage code (ex. 25V:250, 50V:500)
Series code
Category
Please refer to "Product code guide (radial lead type)"
φD 12.5　　14.5　　16 　　18
φd 0.6　　0.8 　　0.8 0.8
F 5.0 7.5 7.5 7.5
φD'
φD+0.5max.
L'
L+1.5max.
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
186
CAT. No. E1001N