EFTP630LGN602ML50N Datasheet, PDF (1/2 Pages) United Chemi-Con, Inc. – LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS

LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Inverter-use screw terminal, 85C
@Ideal for inverter smoothing capacitors such as Electric Vehicle, Hybrid Car, etc.
@Endurance with ripple current : 85C 5000 hours
@Rated voltage range : 63 to 450Vdc
@Lower profile offers drastic space saving comparing to conventional cylindrical type
@Superior heat radiation realizes higher ripple current
?SPECIFICATIONS
Items
Characteristics
Category
Temperature Range ^{-40 to +85C (63K100Vdc), -25 to +85C (350K450Vdc)}
Rated Voltage Range
Capacitance Tolerance
Leakage Current
Dissipation Factor
(tane)
Low Temperature
Characteristics
Endurance
Shelf Life
63 to 450Vdc
P20% (M)
I=0.02CV or 5mA, whichever is smaller.
Where, I : Max. leakage current (MA), C : Nominal capacitance (MF), V : Rated voltage (V)
(at 20C, 120Hz)
(at 20C after 5 minutes)
0.25 max.
(at 20C, 120Hz)
Capacitance change 63 to 100Vdc : C(-40C)/C(+20C)]0.6
350 to 450Vdc : C(-25C)/C(+20C)]0.7
(at 120Hz)
The following specifications shall be satisfied when the capacitors are restored to 20C after subjected to DC voltage with the rated
ripple current is applied for 5000 hours at 85C.
Capacitance change [P20% of the initial value
D.F. (tanE)
[200% of the initial specified value
Leakage current
[The initial specified value
The following specifications shall be satisfied when the capacitors are restored to 20C after exposing them for 1000 hours at 85C
without voltage applied.
Capacitance change [P20% of the initial value
D.F. (tanE)
[200% of the initial specified value
Leakage current
[The initial specified value
?DIMENSIONS (Screw-Mount) [mm]
@Terminal Code : LG
@Size Code : L
Sleeve
@Size Code : R
Sleeve
23+3max.
L+2max.
L+11max. 2.4P0.5
Vent
2-M5
26+3max.
32+3max.
?PART NUMBERING SYSTEM
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
E F TP AAA LG N AAA M AAA N
Supplement code
Size code
Capacitance tolerance code
Capacitance code (ex. 270MF:271,10000MF:103)
Mounting clamp code
Terminal code
Voltage code (ex. 63V:630,100V:101,450V:451)
Series code
Category
Please refer to "A guide to global code (screw-mount terminal type)"
L+2max.
L+12max. ^2.9P0.5
Vent
2-M5
35+3max.
<Screw specifications>
Plus hexagon-headed screw: M5B0.8
Maximum screw tightening torque: 3.23Nm
(1/2)
CAT. No. E1001E