ECLA201E Datasheet, PDF (1/2 Pages) United Chemi-Con, Inc. – Aluminum Electrolytic Capacitors

Engineering Bulletin Tentative
No.717B / Mar.2005
Aluminum Electrolytic Capacitors
@For electronic ballast circuits
@Endurance with ripple current : 105C 4,000 to 5,000 hours
@Non solvent-proof type
@Pb-free design
?SPECIFICATIONS
Items
Characteristics
Category
Temperature Range ^{-40 to +105C (200 to 400Vdc) -25 to+105C (450Vdc)}
Rated Voltage Range 200 to 450Vdc
Capacitance Tolerance P20% (M)
(at 20C, 120Hz)
Leakage Current CV
time _{After 1 minute}
After 5 minutes
CV[1,000
I=0.1CV+40
I=0.03CV+15
CV>1,000
I=0.04CV+100
I=0.02CV+25
Where, I : Max. leakage current (MA), C : Nominal capacitance (MF), V : Rated voltage (V)
(at 20C)
Dissipation Factor Rated voltage (Vdc)
(tanE)
tanE (Max.)
200 & 250V 350 & 400V 450V
0.20
0.24
0.24
(at 20C, 120Hz)
Low Temperature
Characteristics
(Max. Impedance Ratio)
Rated voltage (Vdc)
Z(-25C)/Z(+20C)
Z(-40C)/Z(+20C)
200 & 250V
3
6
350 & 400V 450V
5
6
6
-
(at 120Hz)
Endurance
The following specifications shall be satisfied when the capacitors are restored to 20C after subjected to DC voltage with the rated
ripple current is applied for 5,000 hours (4,000 hours for F8 and F10B12.5L) at 105C.
Capacitance change [P25% of the initial value
D.F. (tanE)
[200% of the initial specified value
Leakage current
[The initial specified value
Shelf Life
The following specifications shall be satisfied when the capacitors are restored to 20C after exposing them for 1,000 hours at 105C
without voltage applied.
Capacitance change [P20% of the initial value
D.F. (tanE)
[200% of the initial specified value
Leakage current
[500% of the initial specified value
?DIMENSIONS [mm]
@Terminal Code : E
Sleeve (Brown : PET)
Vent
L'
15min.
4min.
(F8 & F10)
(F12.5 to F18)
Gas escape end seal
?PART NUMBERING SYSTEM
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
E CLA AAA E AA AAA M AAA S
Supplement code
Size code
Capacitance tolerance code
Capacitance code (ex. 3.3MF:3R3,10MF:100,100MF:101)
Lead forming·taping code
Terminal code
Voltage code (ex. 250V:251,450V:451)
Series code
Category
fD 8
10 12.5 16 18
fd 0.6 0.6 0.6 0.8 0.8
F 3.5 5.0 5.0 7.5 7.5
L'
L+1.5max.
?RATED RIPPLE CURRENT MULTIPLIERS
@Frequency Multipliers
Frequency (Hz)
Capacitance (mF)
120
1 to 22
1.00
1k
2.00
10k 100k
2.80 3.10
33 to 220
1.00 1.80 2.45 2.60
Specifications in this bulletin are subject to change without notice.
NIPPON CHEMI-CON CORPORATION
1279
1