CM2835 Datasheet, PDF (5/9 Pages) List of Unclassifed Manufacturers – 300mA CMOS LDO

CM2835
300mA CMOS LDO
DETAILED DESCRIPTION
The CM2835 family of CMOS regulators contain a PMOS pass transistor, voltage reference, error amplifier, over-current
protection, thermal shutdown.
The P-channel pass transistor receives data from the error amplifier, over-current protection, and thermal protection circuits.
During normal operation, the error amplifier compares the output voltage to a precision reference. Over-current and Thermal
shutdown circuits become active when the junction temperature exceeds 150℃, or the current exceeds 300mA. During thermal
shutdown, the output voltage remains low. Normal operation is restored when the junction temperature drops below 120℃.
The CM2835 switches from voltage mode to current mode when the load exceeds the rated output current. This prevents
over-stress.
EXTERNAL CAPACITOR
The CM2835 is stable with a Low ESR output capacitor to ground of 1.0μF or greater. It can keep stable even with higher ESR
capacitors. A second capacitor is recommended between the input and ground to stabilize VIN. The input capacitor should be
larger than 0.1μF to have a beneficial effect. All capacitors should be placed in close proximity to the pins. A “quiet” ground
termination is desirable.
TYPICAL CHARACTERISTICS
2006/10/11 Rev1.4
Champion Microelectronic Corporation
Page 5