|
CM2915 Datasheet, PDF (13/19 Pages) Ceramate Technical – LCD Driver (19x4) with Key Scan (4x8) | |||
|
◁ |
CM2915
LCD Driver (19*4) with Key Scan (4*8)
The vaules of the data codes ( D0 - - D7 )
The CM2915 contains 32 function keysãEach key corresponds to one data codeã The CM2915
provide 3 double keysã
C. The CM2915 data codes :
KEY
DATA CODES
NAME D0 - - - - - - - - - - D6 D7
K11
0 0 0 0 0 0 0 0/1
K21
1 0 0 0 0 0 0 0/1
K31
0 1 0 0 0 0 0 0/1
K41
1 1 0 0 0 0 0 0/1
K12
0 0 1 0 0 0 0 0/1
K22
1 0 1 0 0 0 0 0/1
K32
0 1 1 0 0 0 0 0/1
K42
1 1 1 0 0 0 0 0/1
K13
0 0 0 1 0 0 0 0/1
K23
1 0 0 1 0 0 0 0/1
K33
0 1 0 1 0 0 0 0/1
K43
1 1 0 1 0 0 0 0/1
K14
0 0 1 1 0 0 0 0/1
K24
1 0 1 1 0 0 0 0/1
K34
0 1 1 1 0 0 0 0/1
K44
1 1 1 1 0 0 0 0/1
K16+K26 1 0 1 0 1 1 0 0/1
K16+K36 0 1 1 0 1 1 0 0/1
KEY
DATA CODES
NAME D0 - - - - - - - - - - D6 D7
K15
0 0 0 0 1 0 0 0/1
K25
1 0 0 0 1 0 0 0/1
K35
0 1 0 0 1 0 0 0/1
K45
1 1 0 0 1 0 0 0/1
K16
0 0 1 0 1 0 0 0/1
K26
1 0 1 0 1 0 0 0/1
K36
0 1 1 0 1 0 0 0/1
K46
1 1 1 0 1 0 0 0/1
K17
0 0 0 1 1 0 0 0/1
K27
1 0 0 1 1 0 0 0/1
K37
0 1 0 1 1 0 0 0/1
K47
1 1 0 1 1 0 0 0/1
K18
0 0 1 1 1 0 0 0/1
K28
1 0 1 1 1 0 0 0/1
K38
0 1 1 1 1 0 0 0/1
K48
1 1 1 1 1 0 0 0/1
K16+K46 1 1 1 0 1 1 0 0/1
The 8-bit data codes of will define the inverse codes of the other 8-bit data codes ( D8 - - D15 )ã D7 is
defined by an external switch.
- Code D7=0 -> connect to vdd.
- Code D7=1 -> connect to vss.
7 Function Keys control
If two or more keys are depressed simultaneously ( except K16+K26 & K16+K36 & K16+K46 )
ï¼the transmission is disabled by the multi-depression prevention circuitãAs regards the key transmission
priority in the case of two depressionsï¼with simultaneous depressions ( ± 36 ms ) transmission is
disabled and first depressionsï¼later remainder priority is usedã
When a key is pressedï¼reading of the custom code and key data code is startedï¼and IRO
output begins 36 ms laterï¼so that if the key is begin depressed during this 36 ms interval one
transmission is performedãIf a key is held down for 108 ms or longerï¼consecutive transmissions
of the leader code only are performed while the key is depressedãAs a key interruption operation
can handle an interval of up to 126 ms ( from ON to ON ) ãIt is possible to configure a system
with an extremely fast response timeã
* All specs and applications shown above subject to change without prior notice.
1F-5 NO.66 SEC.2 NAN-KAN RD ., LUCHU , TAOYUAN, TAIWAN
Tel:886-3-3214525
Fax:886-3-3521052
Page 13 of 19
Email: server@ceramate.com.tw
Http: www.ceramate.com.tw
Rev 1.0 Aug.1, 2003
|
▷ |