CP103 Datasheet, PDF (1/9 Pages) Ceramate Technical – Dual OP Amp And Voltage Reference

CP103
General Description
Dual OP Amp And Voltage Reference
Features
The CP103 is a monolithic IC specifically designed
to regulate the output current and voltage levels of
switching battery chargers and power supplies.
The device contains two Op Amps and a 2.5V preci-
sion shunt voltage reference. Op Amp 1 is designed for
voltage control with its non-inverting input internally
connects to the output of the shunt regulator. Op Amp
2 is for current control with both inputs uncommitted.
The IC offers the power converter designer a control
solution that features increased precision with a corre-
sponding reduction in system complexity and cost.
The CP103 is available in standard packages of DIP-
8 and SOP-8.
Op Amp
· Input Offset Voltage: 0.5mV
· Supply Current: 75µA per Op Amp at 5.0V Sup-
ply Voltage
· Unity Gain Bandwidth: 1MHz
· Output Voltage Swing: 0 to (V_CC - 1.5) V
· Power Supply Range: 3 to 36V
Voltage Reference
· Fixed Output Voltage Reference: 2.5V
· Voltage Tolerance: ± 0.5%, ± 1%
· Sink Current Capability from 0.05 to 80mA
· Typical Output Impedance: 0.2Ω
Applications
· Battery Charger
· Switching Power Supply
SOP-8
DIP-8
Figure 1. Package Types of CP103
* All specs and applications shown above subject to change without prior notice.
1F-5 NO.66 SEC.2 NAN-KAN RD ., LUCHU , TAOYUAN, TAIWAN
Tel:[phone]
Fax:[phone]
Page 1 of 9
Email: [e-mail]
Http: www.ceramate.com.tw
Rev 1.1 Oct. 28,2004