English
Language : 

XPE2 Datasheet, PDF (1/12 Pages) Cree, Inc – Cree® XLamp® XP-E2 LEDs
Product family data sheet
Cree® XLamp® XP-E2 LEDs
Product Description
The XLamp XP-E2 LED builds on the
unprecedented performance of the
original XP-E by increasing lumen
output up to 20% while providing
a single die LED point source for
precise optical control. The XP-
E2 LED shares the same footprint
as the original XP-E, providing a
seamless upgrade path to more
lumens and/or greater efficiency
while shortening the design cycle
for existing XP customers.
XLamp XP-E2 LEDs are the ideal
choice for lighting applications
where high light output and
maximum efficacy are required,
such as LED retrofit lamps, outdoor
lighting, portable lighting, or indoor
directional lighting.
FEATURES
• Available in white, outdoor white,
80-CRI, 85-CRI and 90-CRI white
• ANSI-compatible chromaticity
bins
• Binned @ 85 °C
• Maximum drive current: 1 A
• Low thermal resistance: 9 °C/W
• Wide viewing angle: 110°
• Unlimited floor life at
≤ 30 °C/85% RH
• Reflow solderable - JEDEC J-STD-
020C compatible
• Electrically neutral thermal path
Table of Contents
Flux Characteristics..................... 2
Characteristics........................... 3
Relative Spectral Power
Distribution............................... 3
Relative Flux vs. Junction
Temperature.............................. 4
Electrical Characteristics.............. 4
Thermal Design.......................... 5
Relative Flux vs. Current............. 5
Relative Chromaticity vs. Current
and Temperature - Warm White.... 6
Typical Spatial Distribution........... 7
Reflow Soldering Characteristics... 8
Notes........................................ 9
Mechanical Dimensions..............10
Tape and Reel...........................11
Packaging.................................12
Copyright © 2012 Cree, Inc. All rights reserved. The information in this document is subject to change without notice.
Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc.
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300