SILD865170 Datasheet, PDF (1/5 Pages) celduc-relais – AC Semiconductor Contactor pitch 22,5mm with Diagnostic compact size and DIN rail mounting.

celpac^
AC Semiconductor Contactor
pitch 22,5mm with Diagnostic
compact size and DIN rail mounting.
❏ Ready to use Single-Phase Relay: " Install it & Forget it!"
Zero cross model : 150-510VAC
50A back to back thyristors on output
TMS² technology - I²t value > 1500A²s
I²t values on request to 5 000A²s.
❏ Model with diagnostic : status of the SSR and the load .
Normally closed status output .
Without external power supply .
Status visualization by yellow LED (*) .
Status output can be chained.
❏ Very high immunity : Voltage protection on output
and input- 4kV according IEC61000-4-4 & 5
❏ Large control range : 3,5-32VDC with an input
current < 10 mA on all the range.
Green LED visualization on the input.
❏ IP20 housing
❏ Low zero cross voltage ( <15V)
❏ Mounting and dismounting on DIN rail without any
tool or directly mountable on panel.
❏ Designed in conformity with EN60947-4-3
(IEC947-4-3) and EN60950
-UL-cUL
Dimensions :
(*) : was Red on the first pieces.
S/CLP/SILD865170/F/25/03/2005
page 1 /5 GB
SILD865170
Output : 150-510VAC 32A(*)
Input : 3,5-32VDC - I<10mA
Diagnostic : 30VDC - 100mA
PATENTED !
28A
(*) see conditions (thermal curve page 4)
40^M0^aVⁱⁿA^s C 50hz
-
Output
status
+
diag
SSR
Proud to serve you
All technical caracteristics are subject to change without previous notice.
Caractéristiques sujettes à modifications sans préavis.
Typical
application:
9kW resistor
(AC-51 load)
on 400 VAC
+
Input
- ^Control
CHARGE/LOAD
celduc^
relais