ESO01000 Datasheet, PDF (1/4 Pages) celduc-relais – VOLTAGE PROTECTION VOLTAGE PROTECTION

celduc ^®
relais
PRELIMINARY
VOLTAGE PROTECTION
FOR DC SOLID-STATE RELAYS
S/ACC/ESO01000/B/23/09/08
Page 1/4 UK
ESO01000
u Helps protecting solid-state relays against voltage transient due to the
inductive effect of lines and loads.
u Fly wheel diode (D2), with fast response, low on-state voltage drop and
connection polarity free, mounted on the metal base plate to be cooled
by a heatsink for high switching frequency applications (PWM)
u Decoupling capacitor (C1), connection polarity free and non polarized
(polyester) equipped with a discharging resistor
Non-repetitive peak
voltage
u SSR voltage clamping function (D1) not included therefore more ^{Max operating}
adapted to SOM0 DC SSR range (SSR with built-in voltage protection ^{permanent current}
D1)
Clamping voltage
function for DC
relays (D1)
200VDC
80A
No
Operating voltage
range
Current range
DC SSR clamping
voltage function
Isolations
Connections
Dimensions
(LxHxD)
Weight
0-130VDC
0-80A
Non
4kV
Screw terminals
45 x 58.5 x 30
80g
Fig. 1
HIGH SIDE WIRING DIAGRAM
(Load connected to “-“)
Fig. 2
LOW SIDE WIRING DIAGRAM
(Load connected to “+”)
Red wires must
be as short as
possible
Red wires must
be as short as
possible
Fig. 3
INTERNAL DIAGRAM
Proud to serve you
Data given at Tambient=25°C and subject to modification without previous notice
celduc ^®
relais