UPG2415T6X_09 Datasheet, PDF (9/10 Pages) California Eastern Labs – 0.05 to 6.0 GHz SPDT SWITCH

PG2415T6X
RECOMMENDED SOLDERING CONDITIONS
This product should be soldered and mounted under the following recommended conditions. For soldering
methods and conditions other than those recommended below, contact your nearby sales office.
Soldering Method
Infrared Reflow
Partial Heating
Soldering Conditions
Peak temperature (package surface temperature)
Time at peak temperature
Time at temperature of 220C or higher
Preheating time at 120 to 180C
Maximum number of reflow processes
Maximum chlorine content of rosin flux (% mass)
Peak temperature (terminal temperature)
Soldering time (per side of device)
Maximum chlorine content of rosin flux (% mass)
: 260C or below
: 10 seconds or less
: 60 seconds or less
: 12030 seconds
: 3 times
: 0.2%(Wt.) or below
: 350C or below
: 3 seconds or less
: 0.2%(Wt.) or below
Condition Symbol
IR260
HS350
Caution Do not use different soldering methods together (except for partial heating).
Data Sheet PG10797EJ01V0DS
9