UPG2159T5K Datasheet, PDF (8/11 Pages) California Eastern Labs – L,S-BAND MINIATURE SPDT SWITCH

uPG2159T5K
RECOMMENDED SOLDERING CONDITIONS
This product should be soldered and mounted under the following recommended conditions. For soldering methods and
conditions other than those recommended below, contact your nearby sales office.
Soldering Method
Infrared Reflow
Wave soldering
Partial Heating
Soldering Conditions
Peak temperature㸝package surface temperature㸞
Time at peak temperature
Time at temperature of 220Î¥ or higher
Preheating time at 120 to 180Î¥
Maximum number of reflow processes
Maximum chlorine content of rosin flux㸝㸚 mass㸞
: 260Î¥ or below
: 10 seconds or less
: 60 seconds or less
: 120s30 seconds
: 3 times
: 0.2 㸚㸝Wt.㸞or below
Peak temperature㸝molten solder temperature㸞
: 260Î¥ or below
Time at peak temperature
: 10 seconds or less
Preheating temperature㸝package surface temperature㸞 : 120Υ or below
Maximum number of reflow processes
: 1 time
Maximum chlorine content of rosin flux㸝㸚 mass㸞
: 0.2 㸚㸝Wt.㸞or below
Peak temperature㸝pin temperature㸞
Soldering time㸝per side of device㸞
Maximum chlorine content of rosin flux㸝㸚 mass㸞
: 350Î¥ or below
: 3 seconds or less
: 0.2 㸚㸝Wt.㸞or below
Condition Symbol
IR260
WS260
HS350
Caution Do not use different soldering methods together㸝except for partial heating㸞.
8
Preliminary Data Sheet