UPC8232T5N Datasheet, PDF (5/6 Pages) California Eastern Labs – B IPOLAR ANALOG INTE GR ATE D CIR CUIT

P C 8232T 5N
NOTE ON COR R E CT US E
(1) O bs erve precautions for handling becaus e of electro-s tatic s ens itive devices .
(2) F orm a ground pattern as widely as pos s ible to minimize ground impedance (to prevent undes ired os cillation).
All the ground pins mus t be connected together with wide ground pattern to decreas e impedance difference.
(3) T he bypas s capacitor s hould be attached to V CC line.
(4) Do not s upply DC voltage to INP UT pin.
R E C OMME NDE D S OL DE R ING C ONDIT IONS
T his product s hould be s oldered and mounted under the following recommended conditions . F or s oldering
methods and conditions other than thos e recommended below, contact your nearby s ales office.
S oldering Method
Infrared R eflow
W ave S oldering
P artial Heating
S oldering C onditions
P eak temperature (package s urface temperature)
T ime at peak temperature
T ime at temperature of 220 C or higher
P reheating time at 120 to 180 C
Maximum number of reflow proces s es
Maximum chlorine content of ros in flux (% mas s )
P eak temperature (molten s older temperature)
T ime at peak temperature
P reheating temperature (package s urface temperature)
Maximum number of flow proces s es
Maximum chlorine content of ros in flux (% mas s )
P eak temperature (pin temperature)
S oldering time (per s ide of device)
Maximum chlorine content of ros in flux (% mas s )
: 260 C or below
: 10 s econds or les s
: 60 s econds or les s
: 120 30 s econds
: 3 times
: 0.2%(W t.) or below
: 260 C or below
: 10 s econds or les s
: 120 C or below
: 1 time
: 0.2%(W t.) or below
: 350 C or below
: 3 s econds or les s
: 0.2%(W t.) or below
C ondition S ymbol
IR 260
W S 260
HS 350
C aution Do not us e different s oldering methods together (except for partial heating).
5