UPG2010TB Datasheet, PDF (3/10 Pages) California Eastern Labs – HIGH POWER SINGLE CONTROL L-BAND SPDT SWITCH

UPG2010TB
ELECTRICAL CHARACTERISTICS
(TA = +25°C, VDD = 2.8 V, Vcont = 2.8 V/0 V, DC blocking capacitors = 56 pF, unless otherwise specified)
Parameter
Insertion Loss 1
Insertion Loss 2
Isolation 1
Input Return Loss
Output Return Loss
0.1 dB Gain Compression
Input Power ^Note
2nd Harmonics
3rd Harmonics
Supply Current
Switch Control Current
Symbol
LINS1
LINS2
ISL1
RLin
RLout
Pin (0.1 dB)
Test Conditions
f = 0.5 to 1.0 GHz
f = 2.0 GHz
f = 0.5 to 2.0 GHz
f = 0.5 to 2.5 GHz
f = 0.5 to 2.5 GHz
f = 1.0 GHz
2f0
f = 1.0 GHz, Pin = +30.5 dBm
3f0
f = 1.0 GHz, Pin = +30.5 dBm
IDD
Icont
MIN.
−
−
24
15
15
+31.5
TYP.
0.25
0.30
28
20
20
+33.0
MAX.
0.45
0.50
−
−
−
−
Unit
dB
dB
dB
dB
dB
dBm
65
75
−
dBc
65
75
−
dBc
−
50
100
μA
−
4
20
μA
Note Pin (0.1 dB) is the measured input power level when the insertion loss increases 0.1 dB more than that of linear
range.
STANDARD CHARACTERISTICS FOR REFERENCE
(TA = +25°C, VDD = 2.8 V, Vcont = 2.8 V/0 V, DC blocking capacitors = 51 pF, unless otherwise specified)
Parameter
Insertion Loss 3
Isolation 2
Switch Control Speed
Symbol
LINS3
ISL2
tSW
Test Conditions
f = 2.5 GHz
f = 2.5 GHz
MIN.
TYP.
MAX.
Unit
−
0.35
−
dB
−
25
−
dB
−
1
−
μs
Caution
It is necessary to use DC blocking capacitors with the device.
The value of DC blocking capacitors should be chosen to accommodate the frequency of operation,
bandwidth, switching speed and the condition with actual board of your system. The range of recommended
DC blocking capacitor value is less than 100 pF.