English
Language : 

UPG2009TB Datasheet, PDF (3/9 Pages) NEC – NECs L, S-BAND 4W SPDT SWITCH
UPG2009TB
ELECTRICAL CHARACTERISTICS
(TA = +25°C, Vcont1 = 2.8 V, Vcont2 = 0 V or Vcont1 = 0 V, Vcont2 = 2.8, Zo = 50 Ω, off chip DC blocking capacitors value;
56 pF, unless otherwise specified)
Parameter
Insertion Loss
Isolation
Input Return Loss
Output Return Loss
Input Power at 0.1 dB
Compression Point Note
2nd Harmonics
3rd Harmonics
Switching Speed
Symbol
Test Conditions
LINS f = 0.5 to 1.0 GHz
f = 2.0 GHz
f = 2.5 GHz
ISL f = 0.5 to 2.0 GHz
f = 2.5 GHz
RLin f = 0.5 to 2.5 GHz
RLout f = 0.5 to 2.5 GHz
Pin(0.1 dB) f = 1.0 GHz,
Vcont = 2.8 V/0 V
2f0
f = 1.0 GHz, Vcont = 2.8 V/0 V,
Pin = 30.5 dBm
3f0
f = 1.0 GHz, Vcont = 2.8 V/0 V,
Pin = 30.5 dBm
tSW
MIN.
−
−
−
24
−
15
15
32.5
TYP.
0.25
0.30
0.40
28
25
20
20
34
MAX.
0.45
0.50
−
−
−
−
−
−
Unit
dB
dB
dB
dB
dB
dB
dB
dBm
65
75
−
dBc
65
75
−
dBc
−
150
−
ns
Control Current
Icont
Vcont = 2.8 V/0 V, RF Non
−
1
50
μA
Note Pin (0.1 dB) is the measured input power level when the insertion loss increases 0.1 dB more than that of linear
range. All other characteristics are measured in linear range.
Caution
It is necessary to use DC blocking capacitors with the device.
The value of DC blocking capacitors should be chosen to accommodate the frequency of operation, bandwidth, switch-
ing speed and the condition with actual board of your system.The range of recommended DC blocking capacitor value is
less than 100 pF.