UPG168TB Datasheet, PDF (3/7 Pages) California Eastern Labs – L, S-BAND SPDT SWITCH

UPG168TB
ELECTRICAL CHARACTERISTICS (TA = +25°C, Vcont = 3.0 V/0 V, DC blocking capacitors = 51 pF, unless otherwise specified)
PARAMETER
Insertion Loss 1
Insertion Loss 2
Insertion Loss 3
Isolation 1
Isolation 2
Input Return Loss 1
Input Return Loss 2
Output Return Loss 1
Output Return Loss 2
1 dB Gain Compression
Input Power ^Note
Switch Control Speed
Switch Control Current
SYMBOL
LINS1
LINS2
LINS3
ISL1
ISL2
RLin1
RLin2
RLout1
RLout2
Pin (1 dB)
TEST CONDITIONS
f = 0.5 to 1.0 GHz
f = 2.0 GHz
f = 2.0 to 2.5 GHz
f = 0.5 to 2.0 GHz
f = 2.0 to 2.5 GHz
f = 0.5 to 2.0 GHz
f = 2.0 to 2.5 GHz
f = 0.5 to 2.0 GHz
f = 2.0 to 2.5 GHz
f = 1.0 GHz
tSW
Icont
MIN.
−
−
−
22
18
13
11
13
11
+22.0
TYP.
0.30
0.40
−
27
−
19
−
19
−
+26.5
MAX.
0.55
0.65
0.90
−
−
−
−
−
−
−
UNIT
dB
dB
dB
dB
dB
dB
dB
dB
dB
dBm
−
50
200
ns
−
0.5
10
μA
Note Pin (1 dB) is measured the input power level when the insertion loss increases more 1 dB than that of linear range.
STANDARD CHARACTERISTICS FOR REFERENCE
(TA = +25°C, Vcont = 3.0 V/0 V, DC cut capacitors = 51 pF, unless otherwise specified)
PARAMETER
0.1 dB Gain Compression
Input Power ^Note
SYMBOL
TEST CONDITIONS
Pin (0.1 dB) f = 1.0 GHz
MIN.
−
TYP.
+23.0
MAX.
−
UNIT
dBm
Note Pin (0.1 dB) is measured the input power level when the insertion loss increases more 0.1 dB than that of linear range.
Caution This device is used it is necessary to use DC cut capacitors.
The value of DC blocking capacitors should be chosen to accommodate the frequency of operation,
bandwidth, switching speed and the condition with actual board of your system. The range of recommended
DC cut capacitor value is less than 100 pF.