|
PS7241-1A Datasheet, PDF (11/12 Pages) California Eastern Labs – 4-PIN SOP 400 V BREAK DOWN VOLTAGE 1-ch Optical Coupled MOS FET | |||
|
◁ |
PS7241-1A
RECOMMENDED SOLDERING CONDITIONS
(1) Infrared reflow soldering
⢠Peak reflow temperature
260°C or below (package surface temperature)
⢠Time of peak reflow temperature
10 seconds or less
⢠Time of temperature higher than 220°C
60 seconds or less
⢠Time to preheat temperature from 120 to 180°C 120±30 s
⢠Number of reflows
Three
⢠Flux
Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
Recommended Temperature Profile of Infrared Reflow
180ËC
120ËC
120±30 s
(preheating)
(heating)
to 10 s
to 60 s
260ËC MAX.
220ËC
Time (s)
(2) Wave soldering
⢠Temperature
⢠Time
⢠Preheating conditions
⢠Number of times
⢠Flux
260°C or below (molten solder temperature)
10 seconds or less
120°C or below (package surface temperature)
One
Rosin flux containing small amount of chlorine (The flux with a maximum chlorine
content of 0.2 Wt% is recommended.)
(3) Cautions
⢠Fluxes
Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent.
Data Sheet PN10301EJ01V1DS
11
|
▷ |