UPG2160T5K Datasheet, PDF (1/13 Pages) California Eastern Labs – L, S-BAND SINGLE CONTROL SPDT SWITCH

GaAs INTEGRATED CIRCUIT
µPG2160T5K
L, S-BAND SINGLE CONTROL SPDT SWITCH
DESCRIPTION
The µPG2160T5K is a GaAs MMIC for L, S-band SPDT (Single Pole Double Throw) switch which was developed
for mobile phone and other L, S-band applications.
This device can operate frequency from 0.5 to 3.0 GHz, with low insertion loss and high isolation.
This device is housed in a 6-pin plastic TSSON (Thin Shrink Small Out-line Non-leaded) package, and is suitable
for high-density surface mounting.
FEATURES
• Supply voltage
: VDD = 2.4 to 2.8 V (2.6 V TYP.)
• Switch control voltage
: Vcont (H) = 2.4 to VDD (2.6 V TYP.)
: Vcont (L) = −0.2 to 0.2 V (0 V TYP.)
• Low insertion loss
: Lins1 = 0.30 dB TYP. @ f = 0.5 to 1.0 GHz, VDD = 2.6 V, Vcont (H) = 2.6 V, Vcont (L) = 0 V
: Lins2 = 0.35 dB TYP. @ f = 1.0 to 2.0 GHz, VDD = 2.6 V, Vcont (H) = 2.6 V, Vcont (L) = 0 V
: Lins3 = 0.40 dB TYP. @ f = 2.0 to 2.5 GHz, VDD = 2.6 V, Vcont (H) = 2.6 V, Vcont (L) = 0 V
: Lins4 = 0.50 dB TYP. @ f = 2.5 to 3.0 GHz, VDD = 2.6 V, Vcont (H) = 2.6 V, Vcont (L) = 0 V
• High isolation
: ISL1 = 25 dB TYP. @ f = 0.5 to 1.0 GHz, VDD = 2.6 V, Vcont (H) = 2.6 V, Vcont (L) = 0 V
: ISL2 = 18 dB TYP. @ f = 1.0 to 2.0 GHz, VDD = 2.6 V, Vcont (H) = 2.6 V, Vcont (L) = 0 V
: ISL3 = 17 dB TYP. @ f = 2.0 to 2.5 GHz, VDD = 2.6 V, Vcont (H) = 2.6 V, Vcont (L) = 0 V
: ISL4 = 13 dB TYP. @ f = 2.5 to 3.0 GHz, VDD = 2.6 V, Vcont (H) = 2.6 V, Vcont (L) = 0 V
• Handling power
: Pin (0.1 dB) = +21.0 dBm TYP. @ f = 2.0/2.5 GHz, VDD = 2.6 V, Vcont (H) = 2.6 V, Vcont (L) = 0 V
• High-density surface mounting : 6-pin plastic TSSON package (1.0 × 1.0 × 0.37 mm)
APPLICATIONS
• L, S-band digital cellular or cordless telephone
• W-LAN, WLL and Bluetooth^TM etc.
ORDERING INFORMATION
Part Number
µPG2160T5K-E2
Order Number
Package
µPG2160T5K-E2-A 6-pin plastic TSSON
(Pb-Free) ^Note
Marking
Supplying Form
G4 • Embossed tape 8 mm wide
• Pin 1, 6 face the perforation side of the tape
• Qty 5 kpcs/reel
Note With regards to terminal solder (the solder contains lead) plated products (conventionally plated), contact
your nearby sales office.
Remark To order evaluation samples, contact your nearby sales office.
Part number for sample order: µPG2160T5K-A
Caution Observe precautions when handling because these devices are sensitive to electrostatic discharge.
Document No. PG10635EJ01V0DS (1st edition)
Date Published September 2006 NS CP(K)
2006