UPC3231GV_13 Datasheet, PDF (1/16 Pages) California Eastern Labs – GENERAL PURPOSE 5 V 100MHz AGC AMPLIFIER

BIPOLAR ANALOG INTEGRATED CIRCUIT
PC3231GV
GENERAL PURPOSE 5 V 100 MHz AGC AMPLIFIER
DESCRIPTION
The PC3231GV is a silicon monolithic IC designed for use as AGC amplifier for digital CATV, cable modem and
digital terrestrial systems. This IC consists of gain control amplifier and video amplifier.
The package is 8-pin SSOP (Shrink Small Outline Package) suitable for surface mount.
This IC is manufactured using our 30 GHz fmax UHS0 (Ultra High Speed Process) silicon bipolar process.
This process uses silicon nitride passivation film. This material can protect chip surface from external pollution
and prevent corrosion/migration. Thus, this IC has excellent performance, uniformity and reliability.
FEATURES
• Low distortion
: IM3 = 53.5 dBc TYP. @ single-ended output, Vout = 105 dBV (0.5 Vp-p) /tone
• Low noise figure
: NF = 5.0 dB TYP. @ maximum gain
• Wide AGC dynamic range : GCRin = 61 dB TYP. @ input prescribe
• On-chip video amplifier
: Vout = 1.0 Vp-p TYP. @ single-ended output
• Supply voltage
: VCC = 5.0 V TYP.
• Packaged in 8-pin SSOP suitable for surface mounting
APPLICATION
• Digital terrestrial TV/Digital CATV/Cable modem receivers
ORDERING INFORMATION
Part Number
Order Number
Package
PC3231GV-E1 PC3231GV-E1-A 8-pin plastic SSOP
(4.45 mm (175)) (Pb-Free)
Marking
3231
Supplying Form
 Embossed tape 8 mm wide
 Pin 1 indicates pull-out direction of tape
 Qty 1 kpcs/reel
Remark To order evaluation samples, contact your nearby sales office.
Part number for sample order: PC3231GV-A
Caution: Observe precautions when handling because these devices are sensitive to electrostatic discharge
Document No. PU10658EJ01V0DS (1st edition)
Date Published May 2007 NS CP(N)