UPC2771TB Datasheet, PDF (1/7 Pages) California Eastern Labs – 3V, SUPER MINIMOLD MEDIUM POWER SI MMIC AMPLIFIER

3V, SUPER MINIMOLD _UPC2771TB
MEDIUM POWER SI MMIC AMPLIFIER
FEATURES
• HIGH GAIN: 21 dB at 900 to 1500 MHz Typical
• HIGH OUTPUT POWER: PSAT = +12.5 dBm at 900 MHz
+11 dBm at 1500 MHz
• LOW BIAS VOLTAGE: 3.0 V Typical, 2.7 V Minimum
• SUPER SMALL PACKAGE: SOT-363
• TAPE AND REEL PACKAGING OPTION AVAILABLE
DESCRIPTION
NEC's UPC2771TB is a Silicon Monolithic integrated circuit
which is manufactured using the NESAT™ III process. The
NESAT III process produces transistors with fT approaching 20
GHz. The UPC2771TB is pin compatible and has comparable
performance as the larger UPC2771T, so it is suitable for use
as a replacement to help reduce system size. The IC is housed
in a 6 pin super minimold or SOT-363 package. Operating on
a 3 volt supply, this IC is ideally suited for hand-held, portable
designs.
NEC's stringent quality assurance and test procedures ensure
the highest reliability and performance.
GAIN vs. FREQUENCY AND TEMPERATURE
24
TA = -40˚ C
22
20
+85˚ C
TA = +25˚ C
TA = +85˚ C
18
16
VCC = 3.0 V
14
0.1
0.3
+25˚ C
-40˚ C
1.0
3.0
Frequency, f (GHz)
ELECTRICAL CHARACTERISTICS (TA = 25°C, ZL = ZS = 50 Ω, VCC = 3.0 V)
PART NUMBER
PACKAGE OUTLINE
UPC2771TB
S06
SYMBOLS
PARAMETERS AND CONDITIONS
UNITS MIN
TYP MAX
ICC
Circuit Current (no signal)
mA
36
45
GS
Small Signal Gain,
f = 900 MHz
f = 1500 MHz
dB
19
21
24
dB
18
21
24
fU
P1dB
Upper Limit Operating Frequency (The gain at fU is 3 dB down from the gain at 100 MHz)
1 dB Compressed Output Power, f = 900 MHz
f = 1500 MHz
GHz
dBm
dBm
1.8
2.2
+9
+11.5
+7
+9.5
PSAT
Saturated Output Power,
f = 900 MHz
f = 1500 MHz
dBm
dBm
+12.5
+11
NF
Noise Figure,
f = 900 MHz
f = 1500 MHz
dB
6
7.5
dB
6
7.5
RLIN
Input Return Loss,
f = 900 MHz
f = 1500 MHz
dB
10
14
dB
10
14
RLOUT Output Return Loss,
f = 900 MHz
f = 1500 MHz
dB
6.5
9.0
dB
5.5
8.5
ISOL
Isolation,
f = 900 MHz
f = 1500 MHz
dB
25
30
dB
25
30
OIP3
SSB OutputThird Order Intercept Point f = 900, 902 MHz, POUT = +4 dBm
f = 1500, 1502 MHz, POUT = +4 dBm
dBm
+13
dBm
+10
PADJ1
Adjacent Channel Power 1,
f = 900 mHz, π/4 QPSK wave¹, POUT = +7 dBm
∆f = ± 50 kHz
dBc
-61
∆f = ± 100 kHz
dBc
-72
PADJ2
Adjacent Channel Power 2,
f = 1.5 GHz, π/4 QPSK wave¹, POUT = +7 dBm
∆f = ± 50 kHz
dBc
-59
∆f = ± 100 kHz
dBc
-72
Note:
1.π/4 QPSK modulated wave input, data rate 42 kbps, Filter roll off α = 0.5
California Eastern Laboratories