UPC2763TB Datasheet, PDF (1/7 Pages) California Eastern Labs – 3 V, SUPER MINIMOLD MEDIUM POWER SI MMIC AMPLIFIER

3 V, SUPER MINIMOLD
MEDIUM POWER SI MMIC AMPLIFIER
UPC2763TB
FEATURES
• HIGH OUTPUT POWER: PSAT = +11 dBm at 900 MHz
• LOW VOLTAGE: 3.0 V TYP, 2.7 V MIN
• WIDE BANDWIDTH: 2.7 GHz at -3 dB
• HIGH GAIN: 20 dB at 1.9 GHz
• SUPER SMALL PACKAGE: SOT-363 package
• TAPE AND REEL PACKAGING OPTION AVAILABLE
DESCRIPTION
NEC's UPC2763TB is a Silicon Monolithic integrated circuit
which is manufactured using the NESAT™ III process. The
NESAT™ III process produces transistors with fT approaching
20 GHz. The UPC2763TB is pin compatible and has compa-
rable performance to the larger UPC2763T, so it is suitable for
use as a replacement to help reduce system size. The IC is
housed in a 6 pin super minimold or SOT-363 package.
Operating on a 3 volt supply this IC is ideally suited for hand-
held, portable designs.
NEC's stringent quality assurance and test procedures ensure
the highest reliability and performance.
GAIN vs. FREQUENCY AND
TEMPERATURE
24
22
TA = +85°C
TA = +25°C ^{TA = -40°C}
20
18 ^{TA = +25°C}
16
TA = -40°C
TA = +85°C
14
12
10
8
6
0.1
VCC = 3.0 V
0.3
1.0
3.0
Frequency, f (MHz)
ELECTRICAL CHARACTERISTICS (TA = 25°C, ZL = ZS = 50 Ω, VCC = 3.0 V)
PART NUMBER
PACKAGE OUTLINE
UPC2763TB
S06
SYMBOLS
PARAMETERS AND CONDITIONS
UNITS
MIN
TYP
MAX
ICC
Circuit Current (no signal)
mA
27
35
GS
Small Signal Gain, f = 900 MHz
f = 1900 MHz
dB
18
20
23
dB
18
21
24
fU
Upper Limit Operating Frequency
(The gain at fu is 3 dB down from the gain at 0.1 GHz)
GHz
2.3
2.7
P1dB
Output Power at 1 dB Compression Point, f = 900 MHz
dBm
+7
+9.5
f = 1900 MHz
dBm
+4
+6.5
PSAT
Saturated Output Power, f = 900 MHz
dBm
11
f = 1900 MHz
dBm
8
NF
Noise Figure,
f = 900 MHz
dB
f = 1900 MHz
dB
5.5
7.0
5.5
7.5
RLIN
Input Return Loss,
f = 900 MHz
f = 1900 MHz
dB
8
11
dB
8
11
RLOUT Output Return Loss,
f = 900 MHz
f = 1900 MHz
dB
5
7
dB
6
9
ISOL
Isolation,
f = 900 MHz
f = 1900 MHz
dB
25
30
dB
24
29
OIP3
SSB Output Third Order Intercept Point f = 900, 902 MHz
dBm
+17
POUT = +4 dBm
f = 1900, 1902 MHz
dBm
+11
PADJ
Adjacent Channel Power,
∆f = ±50 KHz
dBc
-61
f = 900 MHz, π/4 QPSK wave¹,
∆f = ±100 KHz
dBc
-62
PO = +4 dBm
Note:
1. π/4 QPSK modulated wave input, data rate 42 kbps.
California Eastern Laboratories