UPC2756TB Datasheet, PDF (1/7 Pages) NEC – MIXEROSCILLATOR SILICON MMIC FOR FREQUENCY DOWNCONVERTER OF L BAND WIRELESS RECEIVER

3 V SUPER MINIMOLD L-BAND
SI MMIC DOWNCONVERTER
UPC2756TB
FEATURES
• HIGH DENSITY SURFACE MOUNTING:
6 Pin Super Minimold or SOT-363 package
• WIDE BAND OPERATION:
RF = 0.1 to 2.0 GHz
IF = 10 to 300 MHz
• ON BOARD OSCILLATOR
• SUPPLY VOLTAGE:
VCC = 2.7 TO 3.3 V
INTERNAL BLOCK DIAGRAM
RF
Input
IF
Output
DESCRIPTION
NEC's UPC2756TB is a silicon MMIC integrated circuit manu-
factured using the NESAT III process. The device consists of
a double balance mixer, an IF amplifier and a built-in LO. this
device is suitable as a L-BAND downconverter for the receiver
stage of wireless systems. The UPC2756TB is pin compatible
and has comparable performance as the larger UPC2756T, so
it is suitable for use as a replacement to help reduce system
size. The IC housed in a 6 pin super minimold or SOT-363
package.
LO1 LO2
VCC GND
NEC's stringent quality assurance and test procedures ensure
the highest reliability and performance.
ELECTRICAL CHARACTERISTICS (TA = 25°C, Vcc = 3 V, ZL = Zs = 50 Ω)
PART NUMBER
PACKAGE OUTLINE
UPC2756TB
S06
SYMBOLS
ICC
fRF
fIF
CG
NF
PSAT
OIP3
ISO
PN
RTH (J-A)
PARAMETERS AND CONDITIONS
Circuit Current (no signal)
RF Frequency Response
(3 dB down from the gain at fRF = 900 MHz, fIF = 150 MHz)
IF Frequency Response
(3 dB down from the gain at fRF = 900 MHz, fIF = 150 MHz)
Conversion Gain¹ fRF = 900 MHz, fIF = 150 MHz
fRF = 1.6 GHz, fIF = 20 MHz
Noise Figure
fRF = 900 MHz, fIF = 150 MHz
fRF = 1.6 GHz, fIF = 20 MHz
Saturated Output Power² fRF = 900 MHz, fIF = 150 MHz
fRF = 1.6 GHz, fIF = 20 MHz
SSB Output 3rd Order Intercept Point
fRF = 0.8~2.0 GHz, fIF = 100 MHz
LO Leakage, fLO = 0.8 ~2.0 GHz
Phase Noise³, fOSC = 1.9 GHz
at RF pin
at IF pin
Thermal Resistance (Junction to Ambient)
Mounted on a 50 x 50 x 1.6 mm epoxy glass PWB
UNITS
mA
GHz
MHz
dB
dB
dB
dB
dBm
dBm
dBm
dBm
dBm
dBc/Hz
°C/W
MIN
TYP
3.5
6.0
0.1
10
300
11
14
11
14
10
13
-11
-8
-15
-12
+4
-35
-23
-68
Notes:
1. PRF = -40 dBm.
2. PRF = -10 dBm.
3. See Application Circuit.
MAX
8.0
2.0
17
17
13
16
325
California Eastern Laboratories