PS9713 Datasheet, PDF (1/7 Pages) NEC – 1 Mbps, OPEN COLLECTOR OUTPUT, FOR GATE DRIVE INTERFACE INTELLIGENT POWER MODULE 5-PIN SOP PHOTOCOUPLER

1 Mbps, OPEN-COLLECTOR
OUTPUT FOR GATE DRIVE INTERFACE
INTELLIGENT POWER MODULE
5-PIN SOP PHOTOCOUPLER
PS9713
FEATURES
• HIGH INSTANTANEOUS COMMON MODE
REJECTION VOLTAGE
CMH, CML = ±15 kV/µs MIN
• HIGH SPEED RESPONSE
tPHL= 500 ns MAX, tPLH = 750 ns MAX
• MAXIMUM PROPAGATION DELAYS
tPLH- tPHL = 270 ns TYP
• PULSE WIDTH DISTORTION
| tPHL- tPLH | = 270 ns TYP
• SMALL THIN PACKAGE
5-pin SOP
• TAPING PRODUCT NUMBER
PS9713-F3, F4: 3,500 pcs/reel
DESCRIPTION
PS9713 is an optically coupled isolator containing a GaAIAs
LED on the input side and a photo diode and a signal process-
ing circuit on the output side on one chip.
APPLICATIONS
• IPM DRIVER
• GENERAL PURPOSE INVERTER
ELECTRICAL CHARACTERISTICS¹ (TA = -40 to +100°C, VCC = 15 V unless otherwise specified)
PART NUMBER
SYMBOL
PARAMETERS
VF
Forward Voltage, IF = 10 mA
IR
Reverse Current, VR = 3 V
Ct
Terminal Capacitance, V = 0 V, f = 1 MHz, TA = 25°C
VOL
Low Level Output Voltage
IF = 10 mA, Vcc = 5 V, IO = 2.4 mA
IOH
High Level Output Current
Vcc = 30 V, VF = 0.8 V
ICCH
High Level Supply Current, VCC = 30 V, VF = 0.8 V, V0 = open
ICCL
Low Level Supply Current, VCC = 30 V, IF = 10 mA, V0 = open
IFHL
Threshhold Input Current (High→ Low),
VO = 0.8 V, Io = 0.75 mA
CTR
Current Transfer Ratio, IF = 10 mA, Vo = 0.6 V
RI-O
Isolation Resistance, VI-O = 1 k VDC, RH = 40 to 60%, TA = 25°C
CI-O
Isolation Capacitance, V = 0, f = 1 MHz, TA = 25°C
tPHL
Propagation Delay Time², High → Low
IF = 10 mA, RL = 20 kΩ, CL = 100 pF, VTHHL = 1.5 V, VTHLH = 2.0 V
tPLH
Propagation Delay Time², High → Low
IF = 10 mA, RL = 20 kΩ, CL = 100 pF, VTHHL = 1.5 V, VTHLH = 2.0 V
tPLH-tPHL
Maximum Propagation Delays
IF = 10 mA, RL = 20 kΩ, CL = 100 pF, VTHHL = 1.5 V, VTHLH = 2.0 V
|tPLH-tPHL|
Pulse Width Distortion (PWD)²
IF = 10 mA, RL = 20 kΩ, CL = 100 pF, VTHHL = 1.5 V, VTHLH = 2.0 V
CMH
Instantaneous Common Mode Rejection Voltage (Output:High)³
TA = 25°C, IF = 0 mA,VO > = 3.0 V, VCM = 1.5 kV, RL = 20 kΩ,
CL = 100 pF
CML
Instantaneous Common Mode Rejection Voltage (Output:High)³
TA = 25°C, IF = 10 mA,VO < = 1.0 V, VCM = 1.5 kV, RL = 20 kΩ,
CL = 100 pF
Notes: See Next Page
UNITS
V
µA
pF
V
µA
mA
mA
mA
%
Ω
pF
ns
ns
ns
ns
kV/µs
kV/µs
MIN
1.3
44
10¹¹
-200
15
15
PS9713
TYP
1.65
30
0.13
1.0
0.6
0.6
1.5
110
0.6
250
520
270
270
MAX
2.1
200
0.6
50
1.3
1.3
5.0
500
750
650
650
California Eastern Laboratories