NX8563LB Datasheet, PDF (1/7 Pages) NEC – CW LIGHT SOURCE InGaAsP STRAINED MQW-DFB LASER DIODE MODULE FOR D-WDM APPLICATIONS

NEC's CW InGaAsP
MQW DFB LASER DIODE MODULE
FOR DWDM APPLICATIONS (10 mW MIN)
NX8563
SERIES
FEATURES
• OUTPUT POWER:
Pf = 10 mW MIN
• INTERNAL THERMOELECTRIC COOLER AND ISOLATOR
• HERMETICALLY SEALED 14-PIN BUTTERFLY PACKAGE
• POLARIZATION MAINTAIN FIBER PIGTAIL
• AVAILABLE FOR DWDM WAVELENGTHS BASED ON
ITU-T RECOMMENDATIONS (100 GHz GRID) REFER TO
THE ORDERING INFORMATION
DESCRIPTION
NEC's NX8563 Series are a 1550 nm Multiple Quantum Well
(MQW) structured Distributed Feed-Back (DFB) laser diode
with Polarization Maintain Fiber (PMF). This device is de-
signed as Continuous Wave (CW) light source and ideal for
optical transmission systems in which external modulators are
used.
This device is available for Dense Wavelenght Division Multi-
plexing (DWDM) wave lengths based on ITU-T recommenda-
tions, enabling a wide range of applications.
ELECTRO-OPTICAL CHARACTERISTICS (TLD = TSET, TC = -20 to +70°C)
PART NUMBER
SYMBOLS
TSET
VF
IF
ITH
Pf
λp
∆v
SMSR
RIN
ext
PARAMETERS AND CONDITIONS
Laser Set Temperature
Forward Voltage, Pf = 10 mW
Forward Current, Pf = 10 mW
Threshold Current
Optical Output Power from Fiber,
IF = 125 mA, TLD = TSET
Peak Emission Wavelength¹, Pf = 10 mW, CW,
TLD = TSET
Spectral Line Width, Pf = 10 mW, CW, 3 dB down
Side Mode Suppression Ratio, Pf = 10 mW, CW
Relative Intensity Noise, Pf = 10 mW, 20 MHz to 3 GHz
Polarization Extinction Ratio², Pf = 10 mW, CW
UNITS
°C
V
mA
mA
mW
nm
MHz
dB
dB/Hz
dB
MIN
20
10
1527.99
33
20
Notes:
1. Available for DWDM based on ITU-T recommendations. Please refer to Ordering Information.
2. Polarization state of LD is aligned parallel to the slow axis.
NX8563 Series
TYP
1.2
70
20
ITU-T¹
1
45
MAX
35
1.5
125
40
1611.78
2
-150
California Eastern Laboratories