1N914UR Datasheet, PDF (1/2 Pages) Compensated Deuices Incorporated – SWITCHING DIODE

• 1N914UR AVAILABLE IN JAN, JANTX, AND JANTXV
PER MIL-PRF-19500/116
• SWITCHING DIODE
• HERMETICALLY SEALED
• DOUBLE PLUG CONSTRUCTION
• METALLURGICALLY BONDED
MAXIMUM RATINGS
Operating Temperature: -65°C to +175°C
Storage Temperature: -65°C to +200°C
Operating Current: 75 mA @ TA = + 25°C
Derating Factor: 0.5 mA/°C Above TA = + 25°C
Surge Current A: 1A, sine wave, Pw = 8.3ms
Surge Current B: 0.704A, square wave, Pw = 8.3ms
ELECTRICAL CHARACTERISTICS @ 25°C, unless otherwise specified
VBR
V _RWM
Vf ₁
Vf ₂
t _rr
I0
@I F ^{= 10mA} @I F ^{= 50mA}
(Note 1)
Volts (min) Volts (pk)
mA
100
75
75
V dc
0.8
V dc
1.2
n sec
5
I _R1
@ 20 V dc
nA
25
I _R2
@ 75 V dc
µA
0.5
I _R3
@ 20 V
TA = 150°C
µA
35
NOTE 1 IF = IR = 10 mA, RL = 100 ohms.
I _R4
@ 75 V
TA = 150°C
µA
75
CAPACITANCE CAPACITANCE
@0V
@ 1.5 V
pF
pF
4.0
2.8
1N914UR
and
CDLL914
MILLIMETERS INCHES
DIM MIN MAX MIN MAX
D 1.60 1.70 0.063 0.067
F 0.41 0.55 0.016 0.022
G 3.30 3.70 .130 .146
G1 2.54 REF. .100 REF.
S
0.03 MIN. .001 MIN.
FIGURE 1
DESIGN DATA
CASE: DO-213AA, Hermetically sealed
glass case. (MELF, SOD-80; LL34)
LEAD FINISH: Tin / Lead
THERMAL RESISTANCE (ROJEC):
100 °C/W maximum AT L = 0
THERMAL IMPEDANCE: (Z_OJX): 70
˚C/W maximum
POLARITY: Cathode end is banded.
MOUNTING SURFACE SELECTION:
The Axial Coefficient of Expansion
(COE) Of this Device is Approximately
+6PPM/°C. The COE of the Mounting
Surface System Should Be Selected To
Provide A Suitable Match With This
Device.
22 COREY STREET, MELROSE, MASSACHUSETTS 02176
PHONE [phone]
FAX [phone]
WEBSITE: http://www.cdi-diodes.com E-mail: [e-mail]