HZA336M080G24VT-F Datasheet, PDF (5/6 Pages) Cornell Dubilier Electronics – SMT Hybrid Polymer-Aluminum Electrolytic Capacitors

High Vibration
Type HZA_V -55 ºC to +105 ºC
SMT Hybrid Polymer-Aluminum Electrolytic Capacitors
Recommended Reflow Soldering
300
250
200
160°C
150
100
Peak Temperature
30 sec.
70 sec.
120 seconds
230°C
200°C
50
0
Time (sec)
Case Case Dia. Peak
Time at or Time at or Time at or above Time at or above Number of Reflow
Code (mm) Temperature above 250 °C above 230 °C
217 °C
200 °C
Processes
F
8
260°C
5 seconds 30 seconds
40 seconds
70 seconds
1
G
10
Notes:
1. The capacitors in the 8m and 10 mm case dia. can withstand 2 reflow processes, if the peak temperature does not exceed 245 °C and the time at or
above 240 °C does not exceed 10 seconds.
2. The 2nd reflow process should be performed after the capacitors have returned to room temperature.
3. Temperature should be measured with a thermal couple placed on the top surface of the capacitor.
4. After reflow soldering, the leakage current, D.F., and e.s.r., will meet the initial specifications, and the capacitance will be within ±10% of the initial
measured value when measured at room conditions.
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: [phone] • Fax: [phone]