P20R104K5-F Datasheet, PDF (4/4 Pages) Cornell Dubilier Electronics – Multilayer Ceramic Capacitors

Type P10 to P40 Multilayer Ceramic Capacitors
Notice and Disclaimer: All product drawings, descriptions, specifications, statements, information and
data (collectively, the “Information”) in this datasheet or other publication are subject to change. The
customer is responsible for checking, confirming and verifying the extent to which the Information con-
T _{tained in this datasheet or other publication is applicable to an order at the time the order is placed. All}
EN ^{Information given herein is believed to be accurate and reliable, but it is presented without any guaran-}
M ^{tee, warranty, representation or responsibility of any kind, expressed or implied. Statements of suitability}
E for certain applications are based on the knowledge that the Cornell Dubilier company providing such
C _{statements (“Cornell Dubilier”) has of operating conditions that such Cornell Dubilier company regards}
A _{as typical for such applications, but are not intended to constitute any guarantee, warranty or representa-}
PL ^{tion regarding any such matter – and Cornell Dubilier specifically and expressly disclaims any guarantee,}
E warranty or representation concerning the suitability for a specific customer application, use, storage,
R transportation, or operating environment. The Information is intended for use only by customers who
T have the requisite experience and capability to determine the correct products for their application. Any
N _{technical advice inferred from this Information or otherwise provided by Cornell Dubilier with reference}
E _{to the use of any Cornell Dubilier products is given gratis (unless otherwise specified by Cornell Dubilier),}
AL ^{and Cornell Dubilier assumes no obligation or liability for the advice given or results obtained. Although}
IV ^{Cornell Dubilier strives to apply the most stringent quality and safety standards regarding the design}
and manufacturing of its products, in light of the current state of the art, isolated component failures may
QU ^{still occur. Accordingly, customer applications which require a high degree of reliability or safety should}
E employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies
or other appropriate protective measures) in order to ensure that the failure of an electrical component
OR ^{does not result in a risk of personal injury or property damage. Although all product-related warnings,}
F cautions and notes must be observed, the customer should not assume that all safety measures are indi-
CONTACT ^{KEMET cated in such warnings, cautions and notes, or that other safety measures may not be required.}
DISCONTINUED
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: [phone] • Fax: [phone] • www.cde.com