SPCX Datasheet, PDF (1/5 Pages) Cornell Dubilier Electronics – Offered on tape and reel

Type SPCX Solid Polymer Aluminum SMT Capacitors
The solid polymer SPCX aluminum capacitor is
an ideal choice for general purpose applications
in audio-visual equipment, home appliances,
computers, office equipment, optical and measuring
equipment and industrial robots. The SPCX is a very
cost effective capacitor in a compact low-profile
package that is offered on tape and reel. The SPCX is
environmentally green and RoHS compliant.
Highlights
Complies with the EU Directive 2002/95/EC
• A low-profile height of 1.9 mm
ETE ^Specifica-
requirement restricting the use of Lead (Pb),
Mercury (Hg), Cadmium (Cd), Hexavalent
chromium (Cr(VI)), PolyBrominated Biphe-
nyls (PBB) andPolyBrominated Diphenyl
Ethers (PBDE).
Operating Temperature Range:
Capacitance Range:
Operating Working Range:
Capacitance Tolerance:
Surge Voltage:
L ^{Rated Ripple Current:}
Life Test:
Apply rated voltage at +105 ºC ±2 ºC for 1000 h
O ^{* Leakage current: ≤ ratings table values}
* Capacitance: ±10% of initial measured value
* DF: ≤ ratings table values
S * Appearance: No abnormal change to occur
Moisture Resis-
+60 ºC ±2 ºC @ 90% RH; rated voltage for 500 h
B _{* Leakage current: ≤ rating table values}
* Capacitance: +70%, –20% (2V, 2.5V)
+60%, –20% (4V)
O^{+50%, –20% (6.3V)}
• Offered on tape and reel
• Can withstand 260 ºC reflow for 10 s
• 15 mΩ ESR @ 100 kHz
• A great value in a small package
–40 ºC to +105 ºC
100 µF to 470 µF
2.0, 2.5, 4.0, 6.3 Vdc
±20 % (120 Hz @ 20 ºC)
Vdc 2.0 2.5 4.0 6.3
Surge 2.5 3.1 5.0 8.0
See ratings table
Surge Test:
Test temperature is +15 ºC to +35 ºC in series with
a 1000 Ω resistor with the surge voltage applied
for 1000 cycles of 30±5 s (ON) and 5 min 30 s
(OFF)
• Leakage current: I≤0.1CV
• Capacitance: ±10% of initial measured value
• DF: ≤ the values in the ratings table
• Appearance: No abnormal change to occur
Vibration
10 Hz to 2000 Hz to 10 Hz frequency applied one
cycle per 20 min at a total amplitude of 1.5 mm.
of initial measured value
Direction and duration of vibration will be 2 h each
* DF: ≤200% of initial specified value
in the X,Y and Z planes for total of 6 h with the
* Appearance: No abnormal change to occur
capacitor soldered in place.
Shelf Life Test:
• Appearance; No abnormal change to occur.
• Capacitance: Measured value to be stabilized
+105 ºC ±2 ºC for 500 h
Leakage current: ≤ rating table values
during test, when measured several times
within 30 min before completion of test.
Capacitance: ±10% of initial measured value
DF: ≤ ratings table values
Appearance: No abnormal change to occur
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: [phone] • Fax: [phone] • www.cde.com