|
FCP0603C101J-K1 Datasheet, PDF (1/6 Pages) Cornell Dubilier Electronics – Surface Mount Film Capacitors | |||
|
Type FCP Surface Mount Film Capacitors
Stable Stacked Metallized Film (PPS) Chips for Reï¬ow Soldering
The Type FCPâs combination of high capacitance density
and excellent high frequency response makes it a great
choice for wireless and instrumentation applications.
Highlights
Type FCP stacked metallized polyphenelene sulï¬de (PPS) ï¬lm capacitors offer high
capacitance per unit volume, stable capacitance and DF over a wide temperature
range, and excellent high frequency performance. Type FCP capacitors conform to
standard EIA 0603, 0805, 1206, 1210, 1913 & 2416 surface mount case sizes and
are packaged on tape and reel.
Speciï¬cations
⦠Stacked metallized polyphenylene sulï¬de (PPS) ï¬lm.
⦠High operating temperature to +125 ºC
⦠High capacitance per unit volume
⦠Excellent high frequency performance
⦠Capacitance change from â55 ºC to 105 ºC ⤠±1.5%
⦠Stable cap and DF over wide temperature range
Nominal Capacitance Range:
Capacitance Tolerance:
Rated Voltage:
Dissipation Factor (Tan d):
Operating Temperature Range:
Dielectric Strength:
Insulation Resistance:
Construction:
100 pF to 0.22 µF (1kHz at â¤5 Vrms)
±5% (J) Standard, ±2% (G) Optional
16 Vdc and 50 Vdc
0.6% Max. (1 kHz at â¤5 Vrms)
â55 ºC to +125 ºC (See Voltage derating chart for
0.12 - 0.22 µF above 105 ºC)
175% of rated Vdc for 5 seconds
3000 M⦠Min. at 20 ºC, after 60 seconds (16 Vdc
rated, test 10 Vdc; 50 Vdc rated, test 50 Vdc)
Stacked metallized polyphenylene sulï¬de (PPS)
ï¬lm
Life Test:
Capacitors subjected to 1000 hours of maximum
rated temperature and 125% of the rated voltage
will not have any significant visual damage,
thecapacitance will be within ±2% of the initial
measured value, DF will be a maximum of 0.66%,
and IR will be a minimum of 1000 Megohms.
Resistance to Soldering Heat:
Capacitors subjected to a 260 °C reï¬ow soldering
for 5 seconds will not have any signiï¬cant visual
damage, dielectric strength will be as speciï¬ed,
the capacitance will be within ±3% of the initial
measured value, DF will be a maximum of .66%,
and IR will be a minimum of 1000 Megohms.
Complies with the EU Directive
2002/95/EC requirement
restricting the use of Lead (Pb),
Mercury (Hg), Cadmium (Cd),
Hexavalent chromium (Cr(VI)),
PolyBrominated Biphenyls (PBB)
and PolyBrominated Diphenyl
Ethers (PBDE).
Moisture Resistance:
Capacitors subjected to 1000 hours at 40 °C and
90% to 95% RH and rated voltage will not have any
signiï¬cant visual damage, will withstand 1.3 times
the rated voltage for one minute, the capacitance
will be within ±2% of the initial measured value,
DF will be a maximum of 0.9%, and IR will be a
minimum of 1000 Megohms.
Cornell Dubilier ⢠1605 E. Rodney French Blvd. ⢠New Bedford, MA 02744 ⢠Phone: (508)996-8564 ⢠Fax: (508)996-3830 ⢠www.cde.com
|
▷ |