English
Language : 

FCA1206A105M-H3 Datasheet, PDF (1/5 Pages) Cornell Dubilier Electronics – Acrylic Surface Mount Film Capacitors
Type FCA Acrylic Surface Mount Film Capacitors
Acrylic Stacked Metallized Film Capacitors for Filtering and Noise Attenuation
Type FCA acrylic film chips are non-inductive
stacked metallized film capacitors which feature
large capacitance values in standard surface
mount case sizes.
Highlights
• Smallest film chips
• No piezoelectric effect
• Non-polarized, non-magnetic
• Low ESR
• 1.0 µF/10V in 1206 case
Filtering • Decoupling • Noise Attenuation • Distortion Free Audio
Type FCA acrylic film capacitors offer high and lower DCL than an equivalent tantalum
capacitance values in standard surface mount capacitor, and in high frequency applications
case sizes. They excel in attenuating DC power it takes a tantalum capacitor with ten times
bus noise, and as ripple filters in dc to dc power the capacitance to perform as well as the FCA
conversion circuits. As coupling capacitors in capacitor.
audio circuits, they yield distortion free sound
and better high frequency filtering. The 1.0 µF 10 The capacitor is constructed of noninductive
Vdc rating offers a film capacitor that is a direct stacked layers of metallized acrylic resin film
replacement for tantalum “A” case capacitors. with lead free solder (Sn/Ag/Cu) plated copper
The nonpolar FCA capacitor has lower ESR alloy terminals.
Specifications
Capacitance Range:
Capacitance Tolerance:
Rated Voltage:
AC Voltage Rating:
Operating Temperature Range:
Dissipation Factor:
Dielectric Strength:
Insulation Resistance (IR):
Complies with the EU Directive
2002/95/EC requirement
restricting the use of Lead (Pb), Resistance to Soldering:
Mercury (Hg), Cadmium (Cd),
Hexavalent chromium (Cr(VI)),
PolyBrominated Biphenyls (PBB)
and PolyBrominated Diphenyl
Ethers (PBDE).
0.10 µF to 1.0 µF
±20% @ 1 kHz and +20 ºC
16 Vdc [1.0 µF in 1206 case, 10 Vdc]
12 Vrms
–40 ºC to +85 ºC
0.015 @ 1 kHz and +20 ºC
175% of rated voltage for 5 seconds
After 1 minute @10 Vdc; +20 ºC
IR >1000 MΩ (C ≤0.33 µF)
IR > 300 MΩ•µF (C >0.33 µF)
The capacitor can withstand being heated in an
oven at 235 ºC for 200 seconds
Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8564 • Fax: (508)996-3830 • www.cde.com