ESRE271M02R Datasheet, PDF (1/3 Pages) Cornell Dubilier Electronics – Solid Polymer Aluminum SMT Capacitors Surface Mount, High Capacitance

Type ESRE Solid Polymer Aluminum SMT Capacitors
Capacitance Tripled
Type ESRE polymer aluminum capacitors are low voltage
polarized electrolytic capacitors, with extremely low
equivalent series resistance at high frequency. This yields
capacitors with very low high frequency impedance and
higher ripple current capability than aluminum electrolytic
or tantalum capacitors. One type ESRE capacitor can
replace three or more tantalum or aluminum electrolytic
capacitors. The solid electrolyte of the polymer aluminum
capacitor gives it a long life that is ignition free.
Highlights
• Lowest ESR: <10 mΩ at 100 kHZ
Type ESRE capacitors triple the capacitance ^{• 3.5 A ripple current at 100 kHz}
found in CDE’s type ESRD capacitors.
• “D” case footprint: 7.3 (l) x 4.3 (w)
Applications
• Ignition Free
Motherboard By-Pass
Switching Supply Input/Output Filters
Power Supply Decoupling
High Frequency Noise Reduction
Laptop LCD Displays
Automotive Digital Equipment
Portable Electronic Equipment
Markings
Capacitance
(“R” = Decimal Point)
Polarity Stripe (Anode)
+
W.V. Code
Lot Code
D = 2.0V J = 6.3V
E = 2.5V K = 8.0V
G = 4.0V
Ordering Information
ESRE
101
M
08
R
CDE
Type
Capacitance
Code
101 = 100 µF
Capacitance
Tolerance
M = ±20%
Packaging Code
WVDC Code
R = Tape & Reel 2000 pcs/reel
02 =2.0 Vdc 06 = 6.3 Vdc
0E =2.5 Vdc 08 = 8.0 Vdc
04 =4.0 Vdc
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: [phone] • Fax: [phone] • www.cde.com