DMM Datasheet, PDF (1/3 Pages) Cornell Dubilier Electronics – Type DMM Polyester Film Capacitors

Type DMM Polyester Film Capacitors
Metallized
Radial Leads
Specifications
DC Applications
Self Healing
Type DMM radial-leaded, metallized polyester capacitors
have non-inductive windings and multi-layered epoxy
resin enhancing performace characteristics and humidity
resistance. Self healing characteristics prevent permanent
shorting due to high-voltage transients. When long life
and performance stability are critical Type DMM is the
ideal solution.
Voltage Range: 100-630 Vdc
Capacitance Range: .01-10 µF
Capacitance Tolerance: ±10% (K) standard
±5% (J) optional
Operating Temperature Range: -55 °C to 125 °C*
*Full-rated voltage at 85 °C–Derate linearly to 50%-rated voltage at 125 °C
Pulse Capability
Body Length
Dielectric Strength: 150% (1 minute)
Dissipation Factor: 1% Max. (25 °C, 1 kHz)
Insulation Resistance: 5,000 MΩ x µF
10,000 MΩ Min.
Life Test: 1,000 Hours at 85 °C at
125% Rated Voltage
NOTE: Other capacitance values,
sizes and performance specifications
are available. Contact us.
Rated
Volts
0.55
0.71
0.94 1.024-1.220 1.38
dV/dt—volts per microsecond, maximum
100
250
400
630
Ratings
20
12
8
6
28
17
12
8
7
46
28
15
14
12
72
43
28
21
17
RoHS Compliant
Cap.
Catalog
(µF) Part Number
0.15
0.22
0.33
0.47
0.68
1.00
1.50
2.20
3.30
4.70
6.80
10.00
DMM1P15K–F
DMM1P22K–F
DMM1P33K–F
DMM1P47K–F
DMM1P68K–F
DMM1W1K–F
DMM1W1P5K–F
DMM1W2P2K–F
DMM1W3P3K–F
DMM1W4P7K–F
DMM1W6P8K–F
DMM1W10K–F
0.068 DMM2S68K–F
0.10 DMM2P1K–F
0.15 DMM2P15K–F
0.22 DMM2P22K–F
0.33 DMM2P33K–F
0.47 DMM2P47K–F
0.68 DMM2P68K–F
T Max.
H Max.
Inches (mm) Inches (mm)
100 Vdc
0.236 (6.0)
0.236 (6.0)
0.236 (6.0)
0.394 (10.0)
0.414 (10.5)
0.414 (10.5)
0.236 (6.0) 0.473 (12.0)
0.276 (7.0) 0.551 (14.0)
0.354 (9.0) 0.591 (15.0)
0.354 (9.0) 0.670 (17.0)
0.433 (11.0) 0.788 (20.0)
0.453 (11.5) 0.788 (20.0)
0.512 (13.0) 0.906 (23.0)
0.630 (16.0) 1.024 (26.0)
0.709 (18.0) 1.221 (31.0)
0.236 (6.0)
0.276 (7.0)
250 Vdc
0.394 (10.0)
0.394 (10.0)
0.276 (7.0) 0.433 (11.0)
0.276 (7.0) 0.473 (12.0)
0.276 (7.0) 0.512 (13.0)
0.315 (8.0) 0.591 (15.0)
0.354 (9.0) 0.610 (15.5)
L Max. S ±.06 (±1.5)
Inches (mm) Inches (mm)
0.551 (14.0)
0.551 (14.0)
0.709 (18.0)
0.709 (18.0)
0.709 (18.0)
0.709 (18.0)
1.024 (26.0)
1.024 (26.0)
1.024 (26.0)
1.221 (31.0)
1.221 (31.0)
1.221 (31.0)
0.394 (10.0)
0.394 (10.0)
0.591 (15.0)
0.591 (15.0)
0.591 (15.0)
0.591 (15.0)
0.886 (22.5)
0.886 (22.5)
0.886 (22.5)
1.083 (27.5)
1.083 (27.5)
1.083 (27.5)
0.551 (14.0)
0.551 (14.0)
0.709 (18.0)
0.709 (18.0)
0.709 (18.0)
1.024 (26.0)
1.024 (26.0)
0.390 (10.0)
0.390 (10.0)
0.590 (15.0)
0.590 (15.0)
0.590 (15.0)
0.886 (22.5)
0.886 (22.5)
d
Inches (mm)
0.024 (0.6)
0.024 (0.6)
0.024 (0.6)
0.024 (0.6)
0.024 (0.6)
0.032 (0.8)
0.032 (0.8)
0.032 (0.8)
0.032 (0.8)
0.032 (0.8)
0.032 (0.8)
0.032 (0.8)
0.024 (0.6)
0.024 (0.6)
0.024 (0.6)
0.024 (0.6)
0.024 (0.6)
0.032 (0.8)
0.032 (0.8)
CDE Cornell Dubilier•1605 E. Rodney French Blvd.•New Bedford, MA 02740•Phone: [phone]•Fax: [phone] www.cde.com