940C6P1K-F Datasheet, PDF (1/3 Pages) List of Unclassifed Manufacturers – High dV/dt, Round Polypropylene Film Capacitors

Type 940C through 943C Power Film Capacitors
Electrical Characteristics
Operating Temperature
Capacitance tolerance
Dissipation Factor
Dielectric Withstand
Insulation Resistance
Equivalent Series Resistance (ESR)
Equivalent Series Inductance (ESL)
dV/dt
Rated Current, I_pk and I_rms
Maximum allowable current in amperes at 70 ºC
Capacitance Temperature Coefficient
Service Life
–55 ºC to +105 ºC
*Full rated voltage at 85 ºC, derate linearly to 50% rated voltage at 105 ºC
±10% standard tolerance
<0.1% at 1 kHz, 25 ºC
1.6 x rated voltage for 60 seconds
>100,000 MΩ x µF at 100 Vdc
measured after 2 minutes
See rating tables for values
See rating tables for values
See rating tables for values
See rating tables for values
–200 ppm/ºC ±100 ppm
30,000 hours @ rated Vac, 70 ºC
60,000 hours @ rated Vdc, 70 ºC
Accelerated Tests
Accelerated Life
Performance
Accelerated Pulse Testing
Performance
1.25 x rated DC voltage at 85 ºC
for 2,000 hours
<3% capacitance change
ESR <125% of initial reading
IR >50% of initial limit
per IEC-384
<3% in capacitance change
<.003 increase in DF from initial value
Typical Characteristics
4
2
0
–2
–4
–6
–55 –25 ₀
25
50 75 105
Degrees Centigrade
.20
.15
.10
.05
0
–55 –25 ₀
25
50 75 105
Degrees Centigrade
CDE Cornell Dubilier•1605 E. Rodney French Blvd.•New Bedford, MA 02740•Phone: [phone]•Fax: [phone] www.cde.com