English
Language : 

930 Datasheet, PDF (1/3 Pages) Cornell Dubilier Electronics – Polypropylene Film Capacitors Axial Leaded Metallized Polypropylene
Type 930 Polypropylene Film Capacitors
Axial Leaded Metallized Polypropylene
Type 930 axial-leaded, metallized polypropylene
capacitors are available in a wide range of capacitance
values in small case sizes with a flame-retardant
tape wrap and epoxy end seals that provide moisture
resistance. Type 930 is used most frequently in high-
voltage/high-frequency switching power supplies where
CDE
superior stability and AC performance characteristics
are important. This film capacitor has Underwriters
Laboratories, Inc. recognition for construction only under
U.L. File Number E128034(N).
Outline Drawing
#20 AWG (.032 dia)
Tinned Solid Copper Leads
Highlights
• Small case sizes
• Ripple Current Capacity
• Suitable for high frequency operation
1.625
Min
L
(41.28 mm)
+0.062
Specificatio(n1.5s)
1.625
Min
(41.28 mm)
Capacitance Range:
Voltage Range:
Capacitance Tolerance:
Operating Temperature Range:
Complies with the EU Directive
2002/95/EC requirement
restricting the use of Lead (Pb),
Dielectric
Withstand
voltage:
Mercury (Hg), Cadmium (Cd),
Dissipation Factor (DF):
Hexavalent chromium (Cr(VI)),
PolyBrominated Biphenyls (PBB)
Insulation Resistance:
and PolyBrominated Diphenyl
Ethers (PBDE).
Life Test:
Ratings
NOTE: Other capacitance values, sizes and performance
specifications are available. Contact us.
.022 to 10.0 µF
100 to 630 Vdc (70 to 275 Vac 60 Hz)
±10% (K) Standard; ±5% (J) Optional
–55 ºC to +105 ºC*
*Full rated voltage at 85 ºC - derated linearly to 50%
rated at 105 ºC
200% for 1 minute
0.10% Max. (25 ºC, 1 kHz)
200,000 MΩ x µF
400,000 MΩ Min.
1,000 hours at 85 ºC at 125% rated voltage
Cap.
(µF)
.22
.27
.33
.39
.47
.56
.68
.82
1.00
D
L
ESR
Maximum Ripple Current (Amps rms) at 20 kHz
Catalog
Max.
+0.062 (1.5) 20-100 kHz dV/dt
Case Temperature
Part Number Inches (mm) Inches (mm) (milliohms) (V/µs) +25 ºC +35 ºC +45 ºC +55 ºC +65 ºC +75 ºC +85 ºC
100 Vdc (70 Vac)
930C1P22K–F .275 (7.0) .750 (19.0)
---
25
930C1P27K–F .298 (7.6) .750 (19.0)
---
25
930C1P33K–F .324 (8.2) .750 (19.0)
---
25
930C1P39K–F .347 (8.8) .750 (19.0)
---
25
930C1P47K–F .376 (9.5) .750 (19.0)
37
25 3.7 3.4 3.1 2.8 2.5 2.0 1.4
930C1P56K–F .321 (8.2) 1.000 (25.4)
35
14 3.9 3.6 3.3 2.9 2.6 2.1 1.5
930C1P68K–F .348 (8.8) 1.000 (25.4)
33
14 4.1 3.8 3.5 3.1 2.8 2.2 1.6
930C1P82K–F .377 (9.6) 1.000 (25.4)
31
14 4.3 4.0 3.6 3.2 2.9 2.3 1.7
930C1W1K–F .421 (10.7) 1.000 (25.4)
26
14 5.5 5.1 4.7 4.2 3.6 2.8 2.6
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com