520C Datasheet, PDF (1/7 Pages) Cornell Dubilier Electronics – Long-life, Inverter Grade, Aluminum Ultra-Ripple, Long-life, Inverter Grade

Type 520C 85 °C Long-life, Inverter Grade, Aluminum
Ultra-Ripple, Long-life, Inverter Grade, 85 ºC
Best Value High Ripple Type
Type 520C is the 85 °C version of the Type 550C Inverter-
Grade capacitor. It delivers the ripple-current capability and
exceptional life needed for motor-drive bus capacitors and
approaches the performance of the 550C at lower cost. It is
rated for 8000 hours life with full ripple current, rated voltage,
85 °C and 100 lfm airflow while mounted horizontally.
Horizontal mounting is more severe than vertical mounting.
The extended cathode foil of the 520C assures heat flow
from the capacitor element to the can in all orientations.
Highlights
• 8,000 hour load life
• Ripple current to 55 amps
• ESRs to 8 mΩ
• Best value high ripple current
Specifications
Operating Temperature:
Rated Voltage:
Capacitance:
Capacitance Tolerance:
Leakage Current:
Cold Impedence:
Ripple Current Multipliers:
• Thermal-Pak™ extended cathode construction
–40 °C to +85 °C
200 to 500 Vdc
84 µF to 39,000 µF
–10% +50%
≤3√CV (µA) 5 mA max., 5 minutes
–20 °C multiple of 25 °C Z ≤3
Ambient Temperature
45 °C 55 °C 65 °C 75 °C 85 °C
1.80
1.63
1.45
1.25
1.00
Frequency
10 kHz
50 Hz 60 Hz 120 Hz 360 Hz 1 kHz 5 kHz & up
1 3/8” & 1 3/4” Diameters
200 to 350 V
0.76 0.81 1.00
400 to 500 Vx
0.76 0.81 1.00
1.24 1.36 1.43 1.44
1.24 1.37 1.44 1.45
2” & 2 1/2” Diameters
200 to 350 V
400 to 500 V
0.78 0.83 1.00
0.77 0.82 1.00
1.20 1.29 1.34 1.35
1.22 1.33 1.39 1.40
3” & 3 1/2” Diameters
200 to 350 V
400 to 500 V
0.84 0.88 1.00
0.79 0.84 1.00
1.12 1.17 1.20 1.20
1.18 1.26 1.31 1.32
EIA Ripple Life:
Complies with the EU Directive
2002/95/EC requirement restricting
the use of Lead (Pb), Mercury (Hg),
Cadmium (Cd), Hexavalent chromium
(Cr(VI)), PolyBrominated Biphenyls
(PBB) and PolyBrominated Diphenyl
Ethers (PBDE).
Life Test:
Shelf Life:
Vibration:
8,000 h at full load @ +85 °C per EIA IS-749
∆Capacitance ±20%
ESR 200% of limit
DCL 100% of limit
10,000 h at rated voltage and 85 °C
∆ Capacitance: ±20%
ESR: 200% of limit
DCL: 100% of limit
500 h @ 85 °C, capacitance, ESR and DCL, initial require-
ments
10 to 55 Hz, 0.06” and 10 g max, 1.5 h ea. of 2 axis
CDM Cornell Dubilier • 140 Technology Place • Liberty, SC 29657 • Phone: [phone] • Fax: [phone] • www.cde.com