160224J63C-F Datasheet, PDF (1/5 Pages) Cornell Dubilier Electronics – Type 160 Metallized Polyester Radial Lead Capacitors

Type 160 Metallized Polyester Radial Lead Capacitors
Radial Box Metallized Polyester Capacitors
The Type 160 series radial lead metallized polyester box
capacitors are constructed in rugged rectangular plastic
cases with lead spacings that are standard in the electron-
ics industry. All Type 160 capacitors are available in
bulk with a .217” ±.039” lead length, and they are good
for general purpose applications such as bypass, decou-
pling, energy storage/discharge and arc suppression.
Specifications
Highlights
• RoHS compliant
• Rugged plastic case
• Case and epoxy fill meets UL94V0
• 10 mm through 27.5 mm lead spacings
• Non-inductively wound
• Non-polar
• Wire lead material, tinned copper clad steel
Capacitance Range: _{0.0022 µF to 10.0 µF}
Voltage Range: _{63 Vdc to 1000 Vdc (40 Vac - 250 Vac 50/60 Hz)}
Capacitance Tolerance: _{±5%, ±10%, ±20%}
Operating Temperature Range: _{–55 ºC to +125 ºC (with 50% Vdc derating >85 ºC)}
Dielectric Withstand Voltage: _{1.6 x rated voltage for 2 sec @ +25 ºC ±5 ºC}
Dissipation Factor (DF): _{tanδ x 10}–4 _{at 25 ºC ±5 ºC}
kHz C ≤1 µF C >1 µF
1
≤100
≤100
10
≥150
Total Self Inductance (L): _{Pitch (mm) 10}
L (nH) ≈
9
15 22.5 27.5
10
18
18
Long Term Stability (after two years): Capacitance change ∆C/C ≤ ±3% under stan-
dard environmental conditions
Corona (Partial Discharge Inception Voltage): 200 Vac for 100 Vdc, 200 Vdc
250 Vac for 400 Vdc, 630 Vdc
300 Vac for 1000 Vdc
Maximum Pulse Rise Time (dv/dt):
Vn
10
63
3
100/160
6/8
250
11
400
20
630
30
1000
60
Pitch (mm)
15
22.5
1.5
1
3
2
7
4
10
5.5
15
8
25
15
27.5
1
1
3
5
7
10
If the working voltage (V) is less than the nominal voltage
(Vn), the capacitor can work at higher dv/dt. In this case, the
maximum value allowed is obtained by multiplying the above
value with the ratio Vn/V.
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: [phone] • Fax: [phone] • www.cde.com