|
CAT808 Datasheet, PDF (1/8 Pages) Catalyst Semiconductor – Low-Power Precision Voltage Detector | |||
|
Low-Power Precision Voltage Detector
CAT808
FEATURES
 Ultra Low Current Consumption 2.4µA
 Accurate Voltage Detection Threshold
 Fine Voltage Detection Threshold Resolution
 Active Low Open Drain Output
 Available in 5-pin TSOT- 23 and 3-pin SOT- 89
RoHS compliant packages
 Industrial temperature range -40°C to +85°C
APPLICATIONS
 Battery-Powered Systems
 Power Supply Monitoring
 Handheld and Portable Equipment
 Processor Supervisor Reset
DESCRIPTION
The CAT808 is a high-precision voltage detector
designed for monitoring single cell and multi-cell batteries.
Voltage detection thresholds between 2.0V and 3.2V are
provided with 0.1V resolution and ±3.0% accuracy.
The CAT808 open-drain output is active low until the
VDD voltage exceeds the detection threshold. A low
hysteresis is built into the device to minimize output
âchatterâ, while VDD passes through the detection
threshold, and the output transitions high.
After the CAT808 asserts the output high condition, it
continues to monitor VDD until it drops below the
detection threshold, when the output goes low until
VDD once again exceeds the detection threshold.
For Ordering Information details, see page 7.
PIN CONFIGURATION
TYPICAL APPLICATION
SOT-89
OUT 1
VDD 2
GND 3
5-Lead Thin SOT-23
OUT 1
VDD 2
GND 3
5 NC
Battery
Voltage
4 NC
VDD
CAT808
OUT
GND
IN
DC-DC
10k⦠CONVERTER
SHDN OUT
GND
Note: The value of the pull-up resistor is not critical
© 2006 Catalyst Semiconductor, Inc.
1
Characteristics subject to change without notice
Doc. No. 3024 Rev. A
|
▷ |