|
CAT3643_0710 Datasheet, PDF (1/17 Pages) Catalyst Semiconductor – 3-Channel Ultra High Efficiency Quad-Mode™ LED Driver | |||
|
CAT3643
3-Channel Ultra High Efficiency Quad-Modeâ¢
LED Driver
FEATURES
 High efficiency 1.33x charge pump
 Quad-mode charge pump: 1x, 1.33x, 1.5x, 2x
 Drives up to 3 LEDs at 32mA each
 1-wire EZDim⢠LED current programming
 Power efficiency up to 92%
 Low noise input ripple in all modes
 âZeroâ current shutdown mode
 Soft start and current limiting
 Short circuit protection
 Thermal shutdown protection
 Tiny 12-pad XQFN, 12-pad TDFN and 16-pad
TQFN packages
APPLICATION
 LCD Display Backlight
 Cellular Phones
 Digital Still Cameras
 Handheld Devices
ORDERING INFORMATION
Part Number
CAT3643HV2-T2
CAT3643HV2-GT2
CAT3643HV3-T2
CAT3643HV3-GT2
CAT3643HL1-T2
Package
TDFN-12 3 x 3(1)
TDFN-12 3 x 3(2)
TQFN-16 3 x 3(1)
TQFN-16 3 x 3(2)
XQFN-12 2.5 x 2.5(1)
Marking
HABF
HABG
JAAE
JAAF
LB
Notes:
(1) Matte-Tin Plated Finish (RoHS-compliant)
(2) NiPdAu Plated Finish (RoHS-compliant)
(3) Quantity per reel is 2000
For Ordering Information details, see page 16.
DESCRIPTION
The CAT3643 is a high efficiency Quad-ModeTM
fractional charge pump that can drive up to three
LEDs programmable by a one wire digital interface.
The inclusion of a 1.33x fractional charge pump mode
increases device efficiency by up to 10% over
traditional 1.5x charge pumps with no added external
capacitors.
Low noise input ripple is achieved by operating at a
constant switching frequency which allows the use of
small external ceramic capacitors. The multi-fractional
charge pump supports a wide range of input voltages
from 2.4V to 5.5V.
The EN/DIM logic input functions as a chip enable and
a digital dimming interface for current setting of all
LEDs. Six different current ratios are available via the
interface.
The device is available in the tiny 12-pad XQFN 2.5 x
2.5mm with max height of 0.4mm or in 16-pad TQFN
or 12-pad TDFN 3mm x 3mm package with a max
height of 0.8mm.
Catalyst Semiconductorâs Quad-ModeTM 1.33x charge
pump switching architecture is patented.
TYPICAL APPLICATION CIRCUIT
1µF
1µF
VIN
2.4V CIN
to
5.5V 1µF
1-Wire
EZDimTM
Programming
4.02kâ¦
C1+
VIN
C1- C2+
C2-
VOUT
CAT3643
EN/DIM
RSET
GND
LED1
LED2
LED3
VOUT
COUT
1µF
20mA
© Catalyst Semiconductor, Inc.
1
Characteristics subject to change without notice
Doc. No. MD-5022 Rev. E
|
▷ |