|
CAT3636 Datasheet, PDF (1/15 Pages) Catalyst Semiconductor – 6-Channel Quad-ModeTM Fractional LED Driver in TQFN3x3 | |||
|
CAT3636
6-Channel Quad-ModeTM Fractional LED Driver in TQFN3x3
FEATURES
 High efficiency 1.33x charge pump
 Quad-mode charge pump: 1x, 1.33x, 1.5x, 2x
 Drives up to 6 LEDs at 32mA each
 1-wire EZDimTM LED current programming
 Power efficiency up to 92%
 Low noise input ripple in all modes
 âZeroâ current shutdown mode
 Soft start and current limiting
 Short circuit protection
 Thermal shutdown protection
 Tiny 3mm x 3mm, 16-lead TQFN package
APPLICATIONS
 LCD Display Backlight
 Color RGB LEDs
 Cellular Phones
 Digital Still Cameras
 Handheld Devices
ORDERING INFORMATION
Part
Number
Package
Quantity
per Reel
CAT3636 TQFN-16
HV3-T2 3x3 Green
2000
Package
Marking
JAAA
* Matte Tin Lead Finish
For Ordering Information details, see page 14.
PIN CONFIGURATION
DESCRIPTION
The CAT3636 is a high efficiency quad-mode fractional
charge pump that can drive up to six LEDs
programmable by a one wire digital interface. The
inclusion of a 1.33x fractional charge pump mode
increases device efficiency by up to 10% over traditional
1.5x charge pumps with no added external capacitors.
Low noise input ripple is achieved by operating at a
constant switching frequency which allows the use of
small external ceramic capacitors. The multi-fractional
charge pump supports a wide range of input voltages
from 2.5V to 5.5V.
The EN/SET logic input functions as a chip enable and a
â1-wireâ addressable interface for control and current
setting of all LEDs. Three groups of two LEDs can be
configured with independent LED currents between
0.25mA and 32mA.
The device is available in a tiny 16-lead TQFN 3mm x
3mm package with a max height of 0.8mm.
The 1.33x charge pump with two fly capacitors is a
patent pending architecture exclusive to Catalyst
Semiconductor.
TYPICAL APPLICATION CIRCUIT
© 2006 Catalyst Semiconductor, Inc.
1
Characteristics subject to change without notice
Doc. No. 5020 Rev. A
|
▷ |