|
CAT3616_08 Datasheet, PDF (1/14 Pages) Catalyst Semiconductor – 6-Channel Charge Pump LED Driver with EZDimTM | |||
|
6-Channel Charge Pump LED Driver
with EZDimTM
CAT3616
FEATURES
 6 LED channels with tight matching
 Independent Main and Sub channels
 1-wire EZDimTM Programmable LED Current
 Accurate 1mA Dimming Level
 Power efficiency up to 91%
 Fractional pump 1x/1.5x
 Low noise input ripple
 Fixed High Frequency Operation 1MHz
 âZeroâ Current Shutdown Mode
 Soft start and current limiting
 Short circuit protection
 Thermal shutdown protection
 RoHS-compliant 16-pad TQFN 4mm x 4mm
package
APPLICATION
 Main and sub-display backlight
 Color LCD and keypad Backlighting
 Cellular Phones
 Handheld Devices
 Digital Cameras
ORDERING INFORMATION
Quantity
Part Number Package per Reel
CAT3616HV4-T2 TQFN-16 (1) 2000
CAT3616HV4-GT2 TQFN-16 (2) 2000
Package
Marking
G616
CDAH
Notes: (1) Matte-Tin Plated Finish (RoHS-compliant).
(2) NiPdAu Plated Finish (RoHS-compliant).
DESCRIPTION
The CAT3616 is a high efficiency 1x/1.5x fractional
charge pump with programmable dimming current in
six LED channels. To ensure uniform brightness in
LCD backlight applications, each LED channel
delivers an accurate regulated current.
Low noise and input ripple is achieved by operating at
a constant switching frequency of 1MHz which allows
the use of small external ceramic capacitors. The
1x/1.5x fractional charge pump supports a wide range
of input voltages from 3V to 5.5V with efficiency up to
91%, and is ideal for Li-Ion battery powered devices.
Two groups of LEDs, main (MAIN1 to MAIN4) and sub
(SUB1 and SUB2) are programmable through the
E¯N¯M¯ (active low) and E¯N¯¯S inputs. Independent
current from 1mA to 31mA with a 1mA step are set by
toggling the E¯N¯M¯ and E¯N¯¯S inputs. The enable EN
input pin allows to shutdown the device with zero
quiescent current.
The device is available in a 16-pad TQFN package
with a max height of 0.8mm.
For Ordering Information details, see page 13.
PIN CONFIGURATION
TQFN 16-pad 4 x 4mm (Top view)
TYPICAL APPLICATION CIRCUIT
© Catalyst Semiconductor, Inc.
Characteristics subject to change without notice
Note: Unused LED channels must be connected to VOUT.
1
Doc. No. MD-5018 Rev. C
|
▷ |