BA1-B0-34-610-121 Datasheet, PDF (8/18 Pages) Carling Technologies – CIRUIT BREAKER

8 | B-Series Handle UL489 Listed – Ordering Scheme
B
1
Series
A
2
Actuator
1
3
Poles
B
4
Circuit
0
5
Aux/Alarm
Switch
24
6
Frequency
& Delay
1 SERIES
B
2 ACTUATOR¹
A Handle, one per pole
B Handle, one per multipole unit
S Mid-Trip Handle, one per pole
T Mid-Trip Handle, one per pole & Alarm Switch
3 POLES²
1
One
2
Two
3³ Three
4 CIRCUIT
B Series Trip (Current)
5 AUXILIARY/ALARM SWITCH⁴
0
w/o Aux Switch
1
S.P.D.T., 0.093 Q.C. Term.
2
S.P.D.T., 0.110 Q.C. Term.
3
S.P.D.T., 0.110 Solder Lug
8
S.P.S.T., 0.187 Q.C. Term.
9
S.P.D.T., 0.187 Q.C. Term.
6 FREQUENCY & DELAY
21 AC Ultra Short
22 AC Short
24 AC Medium
26 AC Long
42 AC, Short,Hi-Inrush
44 AC, Medium, Hi-Inrush
46 AC, Long, Hi-Inrush
7 CURRENT RATING (AMPERES)
CODE AMPERES
210 0.100
280 0.800
215 0.150
285 0.850
220 0.200
290 0.900
225 0.250
295 0.950
230 0.300
410 1.000
235 0.350
512 1.250
240 0.400
415 1.500
245 0.450
517 1.750
250 0.500
420 2.000
255 0.550
522 2.250
260 0.600
527 2.750
265 0.650
430 3.000
270 0.700
435 3.500
275 0.750
440 4.000
445 4.500
450 5.000
455 5.500
460 6.000
465 6.500
470 7.000
475 7.500
480 8.000
485 8.500
490 9.000
495 9.500
610 10.000
710 10.500
611 11.000
711 11.500
612 12.000
712 12.500
613 13.000
614 14.000
615 15.000
616 16.000
617 17.000
618 18.000
620 20.000
622 22.000
624 24.000
625 25.000
630 30.000
8 TERMINAL⁵
1
Push-On 0.250 Tab (Q.C.)
2
Screw 8-32 w/upturned lugs
3
Screw 8-32 (Bus Type)
4
Screw 10-32 w/upturned lugs
5
Screw 10-32 (Bus Type)
6
Screw 8-32 w/upturned lugs
and 30° bend
7
Screw 8-32 (Bus Type) and
30° bend
8
Screw 10-32 w/upturned lugs
and 30° bend
9
Screw 10-32 (Bus Type) and
30° bend
A Load Terminal: #8 Screw/QC
Combination. (Special Cat.#)
B Screw M5 w/upturned lugs
C Screw M4 w/upturned lugs
E Screw M4 (Bus Type)
F Screw M5 w/upturned lugs
and 30° bend
G Screw M5 (Bus Type)
and 30° bend
H Screw M5 (Bus Type)
J
Screw M5 Back Connect
K Screw 10-32 Back Connect
M M6 Threaded Stud
N Screw M4 Back Connect
Q Push-In Stud
Y Screw 8-32 Back Connect
450
7
Current Rating
1
8
Terminal
B
9
Actuator
Color
A
10
Mounting/
Barriers
K
11
Max. Appl.
Rating
G
12
Agency
Approval
9 ACTUATOR COLOR & LEGEND⁶
Actuator Color
ON-OFF Dual
White
B
1
Black
D
2
Red
G
3
Green
J
4
Blue
L
5
Yellow
N
6
Gray
Q
7
Orange
S
8
Legend Color
Black
White
White
White
White
Black
Black
Black
10 MOUNTING/BARRIERS
MOUNTING STYLE BARRIERS
Threaded Insert, 2 per pole
A
6-32 x 0.195 inches (multi-pole units only)
yes
B
ISO M3 x 5mm
yes
Rectangular Adapter Plate with mounting centers of 2.062 inches
[52.37mm] and Threaded insert, 2 per pole⁷
C
6-32 X 0.225 inches (multi-pole units only)
yes
D
ISO M3 x 6.5mm
yes
Front panel Snap-In, 0.75” [19.05mm] wide bezel
6
without Handleguard (multipole only)
yes
Front panel Snap-In, 0.96” wide bezel
8
without Handleguard, 1-pole 0.96” wide;
yes
(multipole only) .105” bezel overhang on all sides
11 MAXIMUM APPLICATION RATING
C⁸ 120/240VAC
K
120VAC
12 AGENCY APPROVAL
G UL489 Listed
3
UL489 Listed, TUV Certified
Notes:
1 Actuator Code:
A: Handle tie pin spacer(s) and retainers provided un-assembled with multi-pole units.
B: Handle location as viewed from front of breaker:

2 pole - left pole
3 pole - center pole
S: Handle moves to mid-position only upon electrical trip of the breaker. Available with
circuit codes B, C, D, E, F, G, H and K.
T: Handle moves to mid-position and alarm switch activates only upon electrical trip of the
breaker. Available with circuit codes B & C.
2 All poles must be same polarity.
3 3 pole units available only when 1 of 3 poles is neutral.
4 Auxiliary/Alarm Switch circuit must be same polarity as the main circuit. On multi-pole
breakers, one aux. switch is supplied, mounted in the extreme right pole.
5 Screw Terminals are recommended on ratings greater than 20 amps.
6 Standard actuator colors are black and white.
7 Adapter plate with mounting centers of 2.082 inches. Available with Actuator
Codes A, S and T.
8 Voltage Rating available with 2 and 3-pole breakers only.
9 Barriers supplied on multi-pole units only.
60 Johnson Avenue • Plainville, CT 06062 • Phone: (860) 793–9281 • Fax: (860) 793–9231
Email: [e-mail] • www.carlingtech.com