TPS_SX500 Datasheet, PDF (4/4 Pages) C&D Technologies – AC/DC POWER SUPPLY

Mechanical
0.700
0.550
3.900
8.500
10.00
4.850
2.148
J9
0.040
COVER
1.300
PIN 1
TB2
6-32 THD
(4x)
PIN 1
0.620
3.190
NOTES:
All measurements are in inches
FAN MOUNTED ON COVER ADDS 1.30”.
COOLING: The SX500 is designed to operate with 30 CFM airflow.
SHOCK AND VIBRATION: The SX500 family meets the requirements of MIL STD-810D. (Vibration-Method 514.3 Procedure 1. Shock-Method 516.3 Procedure 1.)
WEIGHT: Approximately 4 lbs.
Pin Specifications
Terminal Block 1
POS
1
2
3
FUNCTION
Ground
AC Neutral
AC Line
Terminal Block 2
POS
1
2
3
4
FUNCTION
+V
+V
-V
-V
Connector Specifications
J9 Connector
Molex No. 22-28-1093
PIN
FUNCTION
1
- Sense
2
+ Sense
3
Current Share
4
Remote Inhibit
5
Power Fail
6
DC OK
7
Sync
8
Signal Ground
9
N/C
Standard Options are shown, consult factory for other available options.
The information provided herein is believed to be reliable; however, C&D TECHNOLOGIES assumes no responsibility for inaccuracies or omissions. C&D TECHNOLOGIES
assumes no responsibility for the use of this information, and all use of such information shall be entirely at the user’s own risk. Prices and specifications are subject to
change without notice. No patent rights or licenses to any of the circuits described herein are implied or granted to any third party. C&D TECHNOLOGIES does not authorize
or warrant any C&D TECHNOLOGIES product for use in life support devices/systems or in aircraft control applications.
Page 4
SX500 10/98 REV B