CPCI420DC Datasheet, PDF (3/4 Pages) C&D Technologies – 420 Watt, 6U x 8HP, CompactPCI

1.59
(8HP)
.60
APPROX.
FAULT
POWER GOOD
10.32
(6U)
MECHANICAL
6.68
6.39
.12
PIN 1
9.18
.26
CL OF CONNECTOR
1.48
CL PIN 1
7.22
.12
AIRFLOW
NOTES: All measurements are in inches.
CONNECTOR:IEC Number is pending.
PIN ASSIGNMENT: Pin assignment consistent with PICMG™ 2.11R1.0 specification. The table below details the PICMG™ assignment.
Pin # ¹
1-4
5-12
13-18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
Staging ²
M
M
M
M
M
M
M
M
M
M
M
S
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
L
M
M
Signal Name
V1
RTN
V2
RTN
V3
V4
RTN
RESERVED³
RTN
GA0⁴
RESERVED
EN#
GA1⁴
V1ADJ⁴
V1 SENSE
GA2⁴
V2ADJ⁴
V2 SENSE
S RTN
V1 SHARE
V3 SENSE
IPMB SCL
DEG#
INH#
IPMB SDA
V2 SHARE
FAL#
IPMB PWR
V3 SHARE
CGND
ACN/+DC IN
ACL/-DC IN
Description
V1 Output
V1 and V2 Return
V2 Output
V3 Return
V3 Output
V4 Output
Signal Return
Reserved
V4 Return
Geographic Address Bit 0
Reserved
Enable
Geographic Address Bit 1
V1 Adjust
V1 Remote Sense
Geographic Address Bit 2
V2 Adjust
V2 Remote Sense
Sense Return
V1 Current Share
V3 Remote Sense
IPMB Serial Clock Line
Degrade Signal
Inhibit
IPMB Serial Data Line
V2 Current Share
Fail Signal
IPMB Power Input
V3 Current Share
Chassis Grnd (Safety Grnd)
AC Input Neutral/+DC Input
AC Input Line/-DC Input
MECHANICAL
Shock: MIL-STD-810d, Method 516.3, Procedure 1.
Vibration: MIL-STD-810d, Method 514.3, Procedure 1.
Dimensions: 6U x 8HP x 1 60mm (see Mechanical above)
EMC & SAFETY
EMI: NEBS Compliant
Safety Agency Ratings
Input Voltage: 48 VDC
Input Current: 15A
Input Power: 650W
Agency Approvals Pending
UL1950/CSA950, EN60950, CE Mark.
(Low Voltage Directive)
NOTES: (1) Pin numbers correspond to the female backplane connector.
(2) L = Long Length Pin (First Make, Last Break); M = Medium Length Pins; S = Short Length Pins (Last Make, First Break)
(3) PICMG™ 2.11 has reserved Pin 23 for future designation -- the cPCI420 uses this pin for synchronous start, required when N>1
for N+1 redundant configurations.
(4) This function not available in the cPCI420DC.
Product: www.cdpowerelectronics.com
cPCI420-DC REV B 8/2002
3