|
UCH_SERIES Datasheet, PDF (1/18 Pages) Murata Manufacturing Co., Ltd. – 1.8−15V Output DC/DC Converters | |||
|
www.murata-ps.com
FEATURES
 Standard âhalf-brickâ conï¬guration
 Designed to meet UL/EN60950-1 safety
approvals (BASIC insulation)
 Fully isolated, 2250Vdc guaranteed
 Output voltages: 1.8 â 15 Volts
 VIN range: 36-75V or 18-36V
 Full 50-150 Watt output power
 Reliable SMT-on-pcb construction
 Input under and output overvoltage shutdown
 Output current limiting and
short-circuit protection
 On/off, VOUT trim and sense functions
 Modiï¬cations and customs for OEMs
 Lead-free RoHS construction/attach
Single Output UCH Models
Isolated, âHalf-Brickâ
1.8â15V Output DC/DC Converters
Typical Unit
PRODUCT OVERVIEW
The high efï¬ciency, low noise and long-term reli-
ability that deï¬nes DATEL DC/DC Converters now
comes to you in the standard âhalf-brickâ conï¬gu-
ration (2.3Ë x 2.4Ë x 0.40Ë). All models in our new
UCH Series meet UL/EN60950-1 safety require-
ments, including each European countryâs devia-
tions. All models have BASIC insulation; guarantee
2250Vdc (in to out) isolation; and because they are
designed with Class B thermal insulation, satisfy
all safety requirements over their full operating
temperatures. Double lead-free construction/attach
meets stringent RoHS speciï¬cations.
UCH Models are designed for demanding tele-
com, datacom and networking applications. Their
âsemi-synchronous-rectiï¬erâ design achieves
impressive efï¬ciencies. Output voltages are
1.8 to 15 Volts. The input voltage range is 36 to 75
or 18 to 36 Volts. All models meet the Low Voltage
Directive (LVD).
For high reliability and affordability, DATEL
utilizes high-speed automatic assembly to
construct the UCHâs proven SMT-on-pcb designs.
An optional baseplate offers full output power at
maximum temperature.
UCHâs feature input ï¬lters, input undervoltage
and overvoltage lockout, output current limiting,
short-circuit protection, and thermal shutdown.
Additionally, all devices have output trim capability
and an on/off control pin that can be ordered with
either polarity.
+SENSE
(6)
+VIN
+VOUT
(4)
(5)
CASE
(2)
âVIN
(1)
Ḥ
For full details go to
www.murata-ps.com/rohs
REMOTE*
ON/OFF
CONTROL
(3)
SWITCH
CONTROL
âVOUT
(9)
PMW
CONTROLLER
OPTO
ISOLATION
REFERENCE &
ERROR MAP
INPUT UNDERVOLTAGE, INPUT
OVERVOLTAGE, AND OUTPUT
OVERVOLTAGE COMPARATORS
Figure 1. Simpliï¬ed Schematic
Typical topology is shown.
*Can be ordered with positive (standard)
or negative (optional) polarity.
âSENSE
(8)
VOUT
TRIM
(7)
www.murata-ps.com
Technical enquiries email: sales@murata-ps.com, tel: +1 508 339 3000
MDC_UCH Models.A15 Page 1 of 18
|
▷ |