IHB60S Datasheet, PDF (1/4 Pages) C&D Technologies – 60 WATT SINGLE OUTPUT HALF BRICK DC/DC CONVERTER

IHB60S
Corporate: www.cdtechno.com
Product: www.cdpowerelectronics.com
60 Watt Single Output Half Brick DC/DC Converter
18 - 40 & 33 - 75V Input
Range
High Efficiency: 84% Typical
1500VDC Isolation Between
Input and Output
Operation to 100°C Baseplate
Temperature
50µS Transient Recovery,
0-90% Load Step
Primary & Secondary Remote
On/Off
Adjustable Output Voltage
IHB60S Series Approved to
UL/CUL 1950, EN60950
The IHB60S series standard half brick modules are designed for today’s
demanding industrial applications. Available in two wide range inputs,
these isolated converters offer many features in the standard models.
With a complement of safety agency approvals and low noise operations,
the converters respond extremely fast to change in load conditions.
Inherent in the design are very well-controlled output voltage and no
need for minimum loading.
MODEL
IHB60S2403
IHB60S2405
IHB60S4803
IHB60S4805
PRODUCT SELECTION CHART
INPUT
VOLTAGE
(VDC)
RATED VOUT (VDC)
24 (18-40)
3.3
24 (18-40)
5.1
48 (33-75)
3.3
48 (33-75)
5.1
RATED MAXIMUM IOUT (A)
18
12
18
12
ABSOLUTE MAX.
RATINGS
Output Short-Circuit
Duration
Continuous
Baseplate Temperature
+100°C
Lead Temperature
(soldering, 10 seconds max) +300°C
Storage Temperature
+125°C
Input to Output Isolation
1500 VDC
EFFICIENCY vs TEMPERATURE
T_CASE = +40°C, nominal input voltage, nominal load, recommended external
components applied, unless otherwise specified.
Case Temperature (°C)