IHB100T Datasheet, PDF (1/4 Pages) C&D Technologies – 100 WATT TRIPLE OUTPUT HALF BRICK DC/DC CONVERTER

IHB100T
Corporate: www.cdtechno.com
Product: www.cdpowerelectronics.com
100 Watt Triple Output Half Brick DC/DC Converter
33 - 75V Input Range
Each Channel Independently
Current Limited
High Efficiency: 88% Typical
1500VDC Isolation Between
Input and Output
Operation to 100°C Baseplate
Temperature
50µS Transient Recovery,
0-90% Load Step
Primary & Secondary Remote
On/Off
IHB100T Series Approved to
UL/CUL 1950, EN60950
The IHB100T series triple output standard half brick modules are designed
for today’s demanding industrial applications. Available in two wide range
inputs, these isolated converters offer many features in the standard models.
With a complement of safety agency approvals and low noise operations, the
converters respond extremely fast to change in load conditions. Inherent in
the design are very well-controlled output voltage and minimal need for
minimum loading on main (V1) output.
MODEL
IHB100T480312
IHB100T480315
IHB100T480512
IHB100T480515
INPUT
VOLTAGE
(VDC)
48 (33-75)
48 (33-75)
48 (33-75)
48 (33-75)
PRODUCT SELECTION CHART
RATED VOUT (VDC)
V1 (±)
V2 (±)
V3 (±)
3.3
12
12
3.3
15
15
5.1
12
12
5.0
15
15
RATED MAXIMUM IOUT (A)
V1(±)
V2(±)
V3(±)
30
4.2
4.2
30
3.4
3.4
20
4.2
4.2
20
2.0
2.0
ABSOLUTE MAX.
RATINGS
Output Short-Circuit
Duration
Continuous
Baseplate Temperature
+100°C
Lead Temperature
(soldering, 10 seconds max) +300°C
Storage Temperature
+125°C
Input to Output Isolation
1500 VDC
EFFICIENCY vs TEMPERATURE
T_CASE = +40°C, nominal input voltage, nominal load, recommended external
components applied, unless otherwise specified.*
Case Temperature (°C)