IHB100S Datasheet, PDF (1/4 Pages) C&D Technologies – 10 WATT SINGLE OUTPUT HALF BRICK DC/DC CONVERTER

IHB100S
Corporate: www.cdtechno.com
Product: www.cdpowerelectronics.com
100 Watt Single Output Half Brick DC/DC Converter
33 - 75V Input Range
1500VDC Isolation Between
Input and Output
High Efficiency: 86% Typical
Operation to 100°C Baseplate
Temperature
50µS Transient Recovery,
0-90% Load Step
Primary & Secondary Remote
On/Off
External Synchronization
IHB100S Series Are Approved
to UL/CUL 1950, EN 60950
The IHB100S series standard half brick modules are designed for today’s
demanding industrial applications. Available in two wide range inputs,
these isolated converters offer many features in the standard models.
With a complement of safety agency approvals and low noise operations,
the converters respond extremely fast to change in load conditions.
Inherent in the design are very well-controlled output voltage and no
need for minimum loading.
MODEL
IHB100S4803
IHB100S4805
PRODUCT SELECTION CHART
INPUT
VOLTAGE
RATED VOUT (VDC)
(VDC)
48 (33-75)
3.3
48 (33-75)
5.1
RATED MAXIMUM IOUT (A)
30
20
ABSOLUTE MAX.
RATINGS
Output Short-Circuit
Duration
Continuous
Baseplate Temperature
+100°C
Lead Temperature
(soldering, 10 seconds max) +300°C
Storage Temperature
+125°C
Input to Output Isolation
1500 VDC
EFFICIENCY vs TEMPERATURE
T = +40°C, nominal input voltage, nominal load, recommended external
CASE
components applied, unless otherwise specified.*
Case Temperature (°C)