CPCI500DC Datasheet, PDF (1/4 Pages) C&D Technologies – 500 Watt, 6U x 4HP, Compact PCI

CorporCatoer:pwowrawte.c:dwtewcwh.ncod.tceocmhno.com
Product: www.cdpowerelectronics.com
cPCI500DC
500 Watt, 6U x 4HP, CompactPCI
6U X 4HP
36-72 VDC Input Range
500 Watt Continuous Output
Power
Complies with PICMG 2.11
R1.0 with 47 Pin I/O Connector
Hot-Swap Capable
Outputs Individually Protected
Against Overloads; Automatic
Recovery
PCI VoltageArchitecture
(5V, 3.3V,+12V,-12V)
IPMI Capability
No Minimum Load
The cPCI500DC is a high-reliability,
500 watt power supply for 6U Compact
PCI™ systems. Developed to support
hot-swap, redundant operation, the
cPCI500DC is designed for compliance
with PICMG™ 2.11 R1.0 Power
Interface Specification with 47-pin I/O
connector, as well as the underlying
CompactPCI™ standards. Available
with IPMI functionality, this unit was
developed with high-availability (HA)
telecommunications applications in
mind. Current sharing and internal
ORing diodes are included to support
these and other applications requiring
reliable, hot-swap performance and N+1
redundant configuration. The 4HP
package and complement of agency
approvals provide for an advanced,
high-density, high-efficiency power
solution for your CompactPCI™ system
requirements.
SPECIFICATIONS, ALL MODELS
PARAMETER
Input Operating Voltage
Input Voltage Withstand
Inrush Current
Efficiency
SYMBOL
Vin
I_i
η
CONDITIONS
36VDC input
72VDC input
48VDC input, 500W load
MIN
36
34
TYP
10
20
80
MAX
72
75
UNITS
VDC
VDC
APK
APK
%
OUTPUT NUMBER
V1
V2
V3
V4
VOUT
RATED OUTPUT VOLTAGE
+5.0VDC
+3.3VDC
+12.0VDC
-12.0VDC
IOUT
RATED OUTPUT CURRENTOUTPUT
Min
A*
B*
0A
55.0 A
30.0 A
0A
30.0 A
60.0 A
0A
11.0 A
11.0 A
0A
1.75 A
1.75 A
REGULATION
+/-1%
+/-1%
+/-1%
+3, -3%
PARAMETER
Temperature Coefficient
PARD
SYMBOL
TC
Output Power
CONDITIONS
20MHz bandwidth
all outputs
50°C max temp.
MIN
TYP
MAX
UNITS
0.02
%/°C
50 mV_P-P
or 1.5% P-P
whichever is greater
500
W
* Total output power not to exceed 500 Watts
cPCI500-DC REV D 8/2002